Connection Of The Appliance To A Pc; Required Configuration; Ethernet Interface - Triax MCT 080 User Manual

FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL

31 Connection of the appliance to a PC

The appliance has an ETHERNET interface that make it possible to connect directly to a PC, or via a
network.
31.1

Required configuration

These drivers are compatible with the following operating systems: Windows Vista ™, Windows
XP ™, Windows Seven ™.
For any other operating system, please contact the technical support TRIAX.
Your PC should also have a free Ethernet port.
31.2

ETHERNET interface

For this kind of connection, no driver installation is required.
Connect the appliance to the PC with a crossover ETHERNET cable.
Configuration of the connection:
Ethernet connection of your appliance to the PC
To change the IP address of your appliance, See chapter "Adjustment", "IP address" for more details.
The PC software in communication with the appliance must have the same IP address as the appliance :
PC software, settle the
192.168.0.160
Attention: If the PC has already been connected to Ethernet (network, modem...), it is
necessary to reboot the PC before connecting your appliance.
PC
Ethernet
network
address at
MCT0
p.
128
8x