Modification Of Parameters; Autolock » Function - Triax MCT 080 User Manual

FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
10.1

Modification of parameters

The various parameters are:
The active List

The name of the setup

The frequency of the emitter or transponder

The standard and bandwidth for DVB-T/H and DVB-T2

The corresponding channel number for terrestrial and cable mode

The symbol rate

The polarization and the band for the satellite

You can shift from terrestrial to satellite mode by:
- Changing the setup frequency
- Changing of standard
- Changing of setup (from a terrestrial to a satellite setup)
The audio mode for the analogical TV

10.2 « AutoLock » function
This function allows you to lock on a digital channel (cable, satellite or terrestrial)
Just enter the frequency or channel (terrestrial), press the "AutoLock" key
seconds the standard, modulation and other signal parameters.
Terrestrial example on channel 38 (frequency 610MHz):
It is the same process in satellite mode.
The "INFO" key gives you access to additional indications depending on the standard
p.
51
, the device finds in a few