Lists Of Measurements And Setup Library - Triax MCT 080 User Manual

FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
5.3

Lists of measurements and setup library

In order to make easier the recall of data on field, the appliance uses 20 Measurement Lists of each 50
lines and a Library of 1000 setups.
A setup corresponds to a terrestrial, cable or satellite emission.
A list of measurements corresponds to a particular installation: presence of several satellite dishes, of
various switches...
Example of list (the background of the table is white)
The same setup may be used in several measurement lists.
The same installation may use two satellite dishes
ASTRA 19.2 in DiSEqC position A
HOT BIRD 13 in DiSEqC position B
Another one may use three satellite dishes
ATLANTIC BIRD 3 in DiSEqC position A
ASTRA 1 in DiSEqC position B
HOT BIRD in DiSEqC position C
The same setup may be used several times in the same measurement list.
ZDF SatCR slot 0
ZDF SatCR slot 1
ZDF SatCR slot 2
ZDF SatCR slot 3...
If a parameter of a setup changes, for example a modification of rate or change from DVB-S to DVB-S2, only
the setup inside the library should be updated.
These lists and setups may be created on a computer thanks to TR7837 free software,
and loaded to the appliance through a USB stick.
Example of library (the background of the table is yellow)
p.
28