Table of Contents
Advertisement
FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
3 Presentation
3.1
General
The field strength measurers MCT08x are handy appliances designed for the installation and maintenance of
any broadcasting and reception installations of analogical and digital terrestrial television channels, satellites
or cable networks.
The band ranges between 5 MHz to 2200 MHz; this allows accurate measurements on all analogical
television standards, FM carrier waves and the various digital standards DVB-C/C2, DVB-T/T2/T2Lite,
DAB/DAB+, DVB-S/S2, DSS.
They do Level measurements in average, peak and power according to the selected standard.
In Measurement Plan mode, they scan up to 50 setups at the same time and compare them to decision
levels (min / max).
Equipped with an efficient Bit Error Rate measurement (various BER, MER), they allow the full validation of
digital transmissions DVB-T/T2/T2Lite, DVB-C/C2, DAB/DAB+, DVB-S/S2 and DSS.
Providing a Constellation diagram for digital standards, the detection and display of Echoes and pre-
echoes and the display of MER per carrier in DVB-T/T2/T2Lite and DVB-C2 to have a complete analysis of
the digital signals.
The Spectrum analysis, quick and accurate, allows the display of the disturbances and the measurement of
C/N, power...
You can display the digital TV terrestrial or satellite under SD or HD, on standards MPEG2, MPEG4, and
HEVC.
The visualization of the terrestrial analog TV image is also possible, in RF signal or CVBS video input.
The Measures-TV-Spectrum mode allows the simultaneous display of level, spectrum and of video of the
same signal.
A HDMI socket allows the transmission of the TV picture to an external monitor.
The sound is audible through the built-in speakers, as well as available on the Jack headphone socket.
Designed for use on field, they are compact (less than 3 kg, battery included), autonomous (battery pack and
quick charger), equipped with a LCD 10'' touchscreen (capacitive).
The high memory content allows the storage of many configurations, measurements and spectrum curves.
Each appliance is fully remote-controlled through ETHERNET connection via a computer.
p.
19
Advertisement
Table of Contents
