Wavelengths - Triax MCT 080 User Manual

FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
On the device, the HOME page provides access to all measurements:
identical to the RF input (Pointing, Spectrum, Measurements / TV, Monitoring, Measurement Plan ...)
-
- choice of working wavelength
measurement of optical power seen on the fiber
-
24.3

Wavelengths

Optical fiber is used at several wavelengths depending on the attenuation / distance curve:
The device can operate at 3 wavelengths: 1310nm, 1490nm or 1550nm
Choose the wavelength corresponding to your installation:
In satellite reception we mainly use the wavelength: 1310nm (check this information on the LNB to be
installed)
You can then point your parable (see chapter 2.2.3 installation of a parable)
access
Triple wavelength optical power
measurement
p.
108
Wavelength
used for the
FO-> RF conversion
Choice of the
wavelength
used for the
FO-> RF conversion