Table of Contents
Advertisement
FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
To check if the aimed satellite is the right one: press the "NIT key"
The appliance searches the MPEG NIT table on one of the 4 transponders and displays the name of the
satellite:
Attention: The displayed name depends on the content of the MPEG NIT table.
Some distributors provide no (or poor) such table.
The displayed information may be wrong.
Attention:
To identify a satellite, you must be « hooked » on all 4 transponders. (Quality > 0)
However, some transponders are regularly modified. See the frequency range of the
satellite when a transponder does not seem to work.
Some switches or LNB work only with DiSEqC commands. In this case, position the
band (OL) and the polarization on DiSEqC at the Configuration page LNB-DiSEqC.
(Attention: the Check Sat is slower when using the DISEqC command).
For any additional information, our technical support is at your disposal:
p.
18
Advertisement
Table of Contents
