Table of Contents
Advertisement
FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
14.2
Satellite band
14.2.1 Launching
Setting the remote power supply to satellite:
OFF to turn off the
remote power supply
under satellite measure
ON to turn on the
remote power
supply under
satellite measure
AUTO to launch
automatically the
remote power supply
in satellite measure
mode even after
shutting off
Configuration lines:
- LO frequency: LO
frequencies for low and high
bands
LO selection: band commutation
on the LNB (22kHz, ToneBurst or
DiSEqC)
- Polar selection: polarization
commutation on the LNB (13/18V
or DiSEqC)
- Switch: switch type and position
(No, ToneBurst, 22kHz, DiSEqC,
Pos A, B, C or D)
- Uncommitted: "Uncommitted" switch
type and position (No, DiSEqC, Pos 1 to
16)
- Positioner: presence of a positioner
(Yes / No)
- DCSS: Digital Channel Stacking (2
modes SATCR and SCD2 single
cable distribution)
p.
80
Advertisement
Table of Contents
