• The illustrations in this operation manual are for explanation and guidance purposes only. • The examples used throughout this manual are based on the HMX Analyser. Dear Triax customer Thank you for purchasing the TRIAX HMX Analyser To ensure safety and many years of trouble-free operation, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions • Cleaning - Unplug the AC power from the mains supply before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product, do not use a chemical cloth to clean it.
Introduction The 3D mini HDMI Analyzer is a tool for checking both source and display devices. With touch button control and built-in OLED (Organic Light Emitting Diode) it can show status of both input and output device. The major purpose is to analyze input source info-frame and output sink EDID. Another purpose is to use built-in pattern to test output device. Applications •...
Operation Controls and Functions - Front Panel HDMI IN: This slot is where you plug your input source equipment with HDMI cable for source signal sending. DC 5V: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.
Top Panel POWER: AUDIO: Press the power button to turn the Press this button to select the audio device On/Off the LED will turn Blue sample rate from LPCM 2CH, LPCM when powered On, and Red when in 5.1CH and LPCM 7.1CH 48kHz or standby mode. LPCM 2CH, LPCM 5.1CH and LPCM 7.1CH 96kHz or LPCM 2CH and INT/EXT:...
OSD Menu • Press the M button on the analyser to display the OSD. • Press Pattern Up/Down Symbol to highlight the required option • Press these keys to select the required timings. • Press M to confirm the selection. System Info • Press the “System Info.” Button to display the EDID information for any connected device. When an output display is connected, press this button repeatedly to bring up the patterns for display (please refer to section __ for pattern...
Sink EDID Option Description Block Data To check the sink Block 0 and Block 1’s EDID table Description To check the sink description of EDID Source Infoframe Option Description AVI (AVI Infoframe Data) To check the source video infoframe packet AUD (Audio Infoframe Data) To check the source audio infoframe packet CEC Command...
OLED Display SAMPLING RATE: The Analyser supports audio sampling rates of 48/96/192kHz, the display will show the signals current sample rate. If external audio is selected the OLED will display ‘BYPASS’. AUDIO CHANNELS: The Analyser supports audio channels from LPCM 2, 5.1 and 7.1 CH. If external audio is selected the OLED will display ‘BYPASS’.
Connection Diagram DVD or BluRay In order to check both the Source and Display device’s information, press the M to display the System Information. In order to check the display device’s Monitor or 3DTV supported timings, connect the HDMI output to the display device and press the PATTERN and TIMING buttons.
Specifications TMDS Clock Frequency 225MHz Input Port 1 x HDMI (Female Type) Output Port 1 x HDMI (Female Type) EXT Mode (HDMI Input) HDMI Resolution 480i/p, 576i/p, 720p-1080p PC Resolution VGA-WUXGA 3D Resolution Support all 3D timing INT Mode (Internal Pattern) HDMI Resolution 480i/p, 576i/p, 720p-1080p PC Resolution...