Table of Contents
Advertisement
7 PROGRAMMING FOR EXECUTING THE MASTER FUNCTION
7 - 16
(3) When saving the parameters to a flash ROM
Select "Flash ROM Operation" under "Tool" after the configuration screen of
DeviceNet is displayed, [Flash ROM Operation] screen will be displayed.
POINT
Save the parameters in the buffer memory to a flash ROM. Otherwise, they are
cleared when the power is turned off or the CPU module is reset.
1)
Set the parameters that are to be saved to a flash ROM in the buffer
memory.
2)
Click the Execute button.
POINT
Since the number of writes to flash ROM is limited, save the parameters to a flash
ROM only when creating or changing parameters.
MELSEC-Q
7 - 16
Advertisement
Table of Contents
Troubleshooting
