LifeSpan TR1200-DT7 Owner's Manual page 40

Treadmill Desk Operations
Troubleshooting
The LifeSpan Treadmill Desk is designed and manufactured to be reliable and
easy to use. However, if you have a problem, these troubleshooting steps may
help you find the cause.
Problem: The console is erratic or not lighting up.
Solution: Check to make sure the treadmill desk is properly plugged in.
Turn the power switch off and back on again and make sure the Safety Key
is in place. Make sure the connectors located in the front of the treadmill
and under the desktop are fully plugged in. If the problem persists contact
LifeSpan customer service.
Problem: The treadmill motor seems strained or E1 comes up after several
minutes of use.
Solution: The silicone lubricant that is applied to the deck and belt is wearing
down and the belt needs to be lubricated with 100% silicone spray (non-
aerosol). Available at www.LifeSpanFitness.com.
Problem: The treadmill automatically pauses during a workout.
Solution: The treadmill is not picking up the step count. Go into the Personal
Settings section (page 34) to turn the Intelli-Guard feature off.
Problem: The treadmill speed doesn't feel right (either too fast or too slow).
Solution: Go into the Personal Settings section (page 34) and check if you are
in Metric or English mode. If you are in the correct mode, contact LifeSpan
customer service.
Problem: "UART" appears in the display.
Solution: Turn the treadmill desk power switch off. Unplug and re-plug the
connections made in Step C on page 22. Make sure the thumb screws are
properly tightened. Turn the treadmill desk power back on and check to see if
it functions properly.
46