LifeSpan TR1200-DT7 Owner's Manual page 24

Desk Assembly
Step 5: Attach Electronics Controller Box
A. Guide the cable with the square connector(B) to the middle of the desk as
shown.
B. Connect the 2 pin Power Cable(C) to the Electronics Controller Box(10).
C. Secure the Electronics Controller Box(10) in place with three M4 screws(18).
D. Attach square connector cables (B, D) to the left side of the Electronics
Controller Box(10).
Right Side
Square
Connector
Cable
M4x10L Screw
(x3)
2.5mm
28
LOCATE BAG LABELED STEP 5
Contents: 3 each M4x10L Screws/Washers
10
B
18
Left Side
D
C
B