Specifications - Harmar Mobility IL500 Sierra Inclined Platform Lift Installation & Service Manual

Rated Load 500 lbs.
Stair Angles 32-45 degrees
Power Supply Input: 110 VAC; 50-60 Hz / Output: 29.1 VDC; 1.2 Amps
Power Source 24VDC Battery
Platform 25" x 36"
Manual Lowering Device Provided
Safety Design
Standards
Safety Features Overspeed Governor
TEC0029 2016SEPT12 PN: 630-00001 REV C
Drive Rack and Worm Gear / 24 VDC 1/8 hp motor with brake
Manual Fold
Power Folding Ramp
for Entry and Exit
Interchangeable Side to side
Travel 40 Feet Maximum
Rail Extruded Aluminum
Speed 14 Feet per Minute
Controls Constant Pressure Rocker Switch on Platform Infrared
wireless call/send controls
ASME A18.1, Section 6 - Incline Platform Lifts CAN/CSA
B44.1 / ASME A17.5 - Elevator & Escalator Equipment
ETL Listed 3148125
Upper and Lower Landing Limits
Upper and Lower Final Limit
Ramp Obstruction Sensors
Under Platform Safety Pan Obstruction Sensors
Drive Chassis Obstruction Sensors
Non-skid Surface
Emergency stop
IL500 Sierra Inclined Platform Lift - Installation & Service Manual

Specifications

3