Ph Test Procedure - eXact pH+ Instruction Manual

12
Things needed in addition to what's in the kit:
Clean sample collection bottle (provided), clean water
(distilled, deionized, or purifi ed bottled water) for rinsing
(16oz), and soft paper towels for drying the probe.
Ensure pH probe is securely installed (see image at
right). If not, see
1
RINSE PH PROBE
Remove Probe/Storage Cap and rinse
the pH probe with clean water and blot
pH probe with soft paper towel or cloth
to remove excess water (never rub or
touch the pH glass bulb).
2
SELECT MENU
Press and re-press the
the top left corner of the display.
3
TEST
Fill Sample Collection Bottle with sample to be tested.
Submerge the probe in the sample and stir gently.
Then allow to sit in the bottle.
4
READ RESULTS
The
clean water and return it to the included storage
solution or to pH 4 buffer. NOTE: If using the eXact
iDip
the Bluetooth Test page to store the displayed result.
©2018, Industrial Test Systems, Inc. Printed in USA

PH TEST PROCEDURE

page 6 for Probe Replacement.
stable icon comes up, rinse the probe with
app, press the Save Result button at the top of
®
button until pH appears in