Recording Functions: Ms Stereo Matrix - Zoom H4n Pro Operation Manual

2-09 Recording functions: MS STEREO MATRIX

This function enables you to convert stereo microphone signals when using a mid-side recording configuration.
Press the MENU button for more
than 2 seconds, and start operation
from the top screen.
1
Press.
2
Select INPUT and press.
3
Select MS MATRIX and press.
4
Make each setting accordingly.
073
ON/OFF MID LEVEL
Set MS STEREO MATRIX to ON or OFF. Set the level of the directional MID mic
that is pointed at the recording target.
Setting values: MUTE, −48.0 – +12.0 dB
Default: +0.0dB
Select Select
Select
Adjust
SIDE LEVEL SOURCE
Set the level of the bidirectional SIDE mic, Set the input used (only in 4CH mode).
which is perpendicular to the MID mic.
Setting values: MUTE, −48.0 – +12.0dB
Default: +0.0dB
Select Select
Select
Adjust
NOTE
MS stereo format overview
This technique converts input from a directional mid mic, which
captures sound in the center, and a bidirectional side mic, which
captures sounds from the left and right, to stereo. You can change
the stereo width as you like by adjusting the side mic level.
Since this technique can capture a wide stereo image, it is
NOTE:
CH SETTING
You cannot use this function
Assign the MID and SIDE inputs to the left
together with MONO MIX.
(INPUT 1) and right (INPUT 2) channels.
Select
Select
ideal for recording large open spaces with numerous sound
sources, including orchestras, live concerts and soundscapes.
This technique is also extremely effective when you want to
adjust room ambience. Since it offers a high degree of freedom,
it is used not only for studio recording but also for a wide range
of recording—even of rehearsals and live performances.
Mid mic
Side mic
074