Zoom H4n Pro Operation Manual page 141

MTR mode effect types and parameters
CRY This effect varies the sound like a talking modulator.
(1) RANGE 1–10
0–10
(2) RESONANC
−10–−1,
(3) SENSE
1–10
(4) BALANCE 0–100
PITCH This effect shifts the pitch up or down
−12–+12,
(1) SHIFT
24
(2) TONE
0–10
(3) FINE
−25–+25
(4) BALANCE
0–100
145
Adjusts the frequency band affected.
Sets the amount of resonance.
Sets the effect sensitivity.
Adjusts the balance of the original and effect
sounds.
Sets the pitch shift in semitones.
Adjusts the tone.
Adjusts the pitch shift in cents (1/100 semitone).
Adjusts the balance of the original and effect
sounds.
● Delay/reverb effects
This effect reproduces the reverberant atmosphere of a
AIR
room and provides spatial depth.
(1) SIZE 1–100
(2) REFLEX 0–10
(3) TONE
0–10
(4) MIX 0–100
DELAY This delay supports long delay times of up to 5000 ms.
This tape echo simulation supports long delay times of up
ECHO
to 5000 ms.
This warm analog delay simulation supports long delay
ANALOG
times of up to 5000 ms.
The 3 effects above have the same parameters.
1–5000 ms, ♪
(1) TIME
(See P.146)
(2) FEEDBACK 0–100
(3) HIDAMP 0–10
(4) MIX
0–100
Sets the size of the space.
Sets the amount of wall reflections.
Adjusts the tone.
Adjusts the amount of effect sound mixed with
the original sound.
Sets the delay time.
Adjusts the amount of feedback.
Adjusts the damping of high frequencies in the
delay sound.
Adjusts the amount of effect sound mixed with
the original sound.