Using Track 1-4 Buttons - Zoom H4n Pro Operation Manual

4-3 Using TRACK 1–4 buttons
The of TRACK 1-4 buttons have different functions depending on the MODE.
Front
TRACK 1-4
MTR MODE
Switch between track recording and playback.
When you start recording, press the track number you want to
record and the track becomes Recording Standby status. That
track button will then become illuminated.
Make track and the input source settings
After selecting the track, use the input source buttons to select
the input for that track. Using the INPUT button you can record
in mono, stereo or a combination of both.
Selecting one track
For stereo input
select MIC or 1
and 2
Same for tracks 2-4
For mono input select
Selecting two tracks
either 1 or 2
These are the four possible
Same for tracks 3 and 4 input selections.
Note: These operations are not possible
during recording and playback.
STEREO/4CH/STAMINA MODE
Move to the
FOLDER SELECT menu
Move to the FILE menu
Move to the SPEED menu
(only STEREO MODE)
Move to the REC FORMAT menu
(STEREO MODE, 4CH MODE)
These operations are not available during
recording and playback.
HINT:
When stereo link active
When tracks are stereo-linked, pressing the
button for one track will have the same effect
on the linked track.
☞
Ref. Stereo link
P.058
020