Related Manuals for Zoom H4next
Summary of Contents for Zoom H4next
-
Page 1: Zoom Corporation
OPERATION MANUAL © ZOOM Corporation Reproduction of this manual, in whole or in part,by any means, is prohibited. -
Page 2: Special Features Of H4N
Special features of H4n Thank you very much for purchasing our ZOOM H4n Handy Recorder (hereinafter abbreviated to H4n). The H4n has the following special features. An all-in-one handy recorder. any sound source. You can enjoy recording and creating your own music any time, anywhere with the H4n. -
Page 3: The H4N Is Ideal For The Following Scenarios
Vocal recording Piano recitals Transfer analogue sound sources to digital sources Any field sound recording... -
Page 4: Table Of Contents
Special features of H4n …………………………………………………………… 001 6-3 Setting up: Built-in microphones /outside microphone with plug-in power … 031 The H4n is ideal for the following scenarios …………………………………… 002 6-4 Setting up: INPUT [1], [2] connections and phantom power source …… 032 A table of contents …………………………………………………………………... - Page 5 1-06-3 Setting / Recording: Recording <ALWAYS NEW> in MTR mode …… 058 3-03-5 Effect <EDIT (EFX) >, editing EFX modules …………………………… 086 1-07 Setting / Recording: TRACK MENU in MTR mode …………………… 059 3-03-6 Effect <EDIT (LEVEL/RENAME) > ……………………………………… 087 1-08-1 Setting / Recording: Re-recording, <PUNCH IN/OUT>...
- Page 6 5-09 Edit / Output : <FILE NORMALIZE> …………………………………… 112 5-10 Edit / Output : <FILE STEREO ENCODE> ……………………………… 113 Main spec list by mode …………………………………………………………… 137 5-11 Edit / Output : <MARK LIST> …………………………………………… 115 Available setting menu list by each mode ……………………………………… 138 5-12 Edit / Output : <DIVIDE>...
-
Page 7: Safety Precautions For Users
Safety precautions for users Alterations In this manual, the warning and caution symbols are used the batteries from the unit. to highlight dangerous accidents and troubles for users to modify the product in any way since this can result read so that accidents can be prevented. The meanings of compartment and battery terminals carefully to in damage to the unit. -
Page 8: Copyright Warnings
Many artists and most live venues do not allow recording and photography and will check for cameras and recorders at the entrance. Even if recording is allowed, it is prohibited to sell, distribute, or upload to the Internet without the organizer’s authorization. -
Page 9: Getting Started
Getting started... -
Page 10: Recording Flow Using The H4N
recording mode and audio quality setting is right for the situation. Set-up Connecting Set-up the Select to other audio recording the Mode 1) The H4n has built-in microphones as well as 2 input jacks with phantom power for use with any 2) You can select among 4 Modes;... - Page 11 RE-RECORDING Edit·Output (Recording again from scratch) 5) The H4n has very convenient 6) In MTR mode the punch-in/ 7) The recordings are saved as ways to swiftly review/playback punch-out function enables you FILES and PROJECTS, and you a recording as well as marking to re-record only the section you can edit them in various ways.
-
Page 12: Easy Recording Guide [Stereo Mode]
The following is basic recording instructions using the built-in stereo microphones and built-in speaker in STEREO MODE. RECORD READY OR STANDBY CONDITION Input from the built-in microphones light on Press. blinks Recording [STEREO TOP SCREEN] standby mark blinks MIC button light on Monitor the input sound *switch on from built-in rec level... - Page 13 [PLAYBACK] [STOP] Press. Press. Press. Press. light on light off Counter turns Now recording Counter returns 0:00:00:00:000 mark Remaining time on SD CARD Adjust the input sound rec level Output: Built-in speaker Counter doesn’t return 0 In detail In detail Places Mark at specific time in WAV file format...
-
Page 14: Name And Function Of Each Part
90 / 120° Variable XY Stereo microphones (Built-in) Input jacks for external stereo microphone STEREO/4CH/MTR mode indicator A built-in mono speaker Backlight Equipped Display Threaded Tripod mount STEREO/4CH mode [1] <FOLDER> Battery cover [2] <FILE> [3] <SPEED>* STEREO mode [4] <WAV/MP3> STAMINA mode *STEREO/4CH mode switch... - Page 15 DC5V AC ADAPTER jack Optional remote-control jack [DIAL] [LINE/PHONE] output jack [MENU] button Installed hole for a strap XLR/STANDARD PHONE XLR/STANDARD PHONE INPUT [1] jack INPUT [2] jack USB port SD card slot POWER switch HOLD switch...
-
Page 16: Included Accessories
The following accessories are included in the H4n package. Inspect the package contents to be sure all accessories are included. - Page 17 When recording outside in the field, covering the built- in microphones with this windshield, you can reduce wind noise. Use a microphone adapter (optional attachment) to install Operation of the H4n unit and the stand can remote control grip the adapter firmly.
-
Page 18: Battery/Power Setting
* Illustration : open the battery compartment cover and insert batteries. * Illustration of a Stamina Switch on. An attached AC adapter Zoom AD-14 * Illustration of closing the battery compartment cover. Explanation about the Stamina Mode. - Page 19 NOTE: in general use about 6 hours You can use conventional alkaline and nickel metal hydride batteries. Alkaline battery in stamina mode about 11 hours the computer with the power switch off, and power is automatically * Approximate lifetime when it is used for continuous recording on WAV 44.1 kHz/16bit format.
-
Page 20: Power On And Off, How To Use Power And Hold Switch
NOTE turned off. the volume of instruments and monitors connected to the H4n. ing up, make sure inserted correctly. w h e n b o o t i n g up, the date and time are set to the primary value. POWER switch HOLD switch <DATA/TIME>... - Page 21 The H4n features a HOLD function to make any button operation inactive, preventing errors during recording. To engage the hold function, slide switch to hold position. * ‘Key Hold’ display * shut down screen If you press any button while the HOLD function is engaged, the screen will display HINT “Key Hold”...
-
Page 22: How To Use The [Rec] And Transport Control Buttons
Buttons like [REC], [STOP], [PLAY/PAUSE], [FF], [REW] each have different functions depending on the H4n’s operation MODE. [REC] button [REC] button Enter recording standby mode and Stop reset the counter to 0 Stop Recording Standby Start recording and counter Stop recording Record, Recording Standby Record Playback... -
Page 23: How To Use The Track [1], [2], [3] And [4] Buttons
The buttons of TRACK [1] – [4] have different functions depending on the MODE. Switch from ‘RECORDING’ to ‘PLAYBACK’ of the Move to the tracks, or the other way around <FOLDER SELECT> menu Move to the <FILE> menu Move to the <SPEED> menu That track button will then become illuminated. -
Page 24: How To Use The Input [Mic], [1] And [2] Buttons
These buttons have different functions depending on the various modes. Select INPUT [MIC] or INPUT [1] [2] and the corresponding button lights up. Whether you select the INPUT [1] or INPUT [2] button, they will both respond the same Both buttons light up after the selection. (Once lighted the buttons do not respond) Any other settings about input sources like [REC LEVEL, should be made to the lighted target. -
Page 25: How To Use Rec Level And Volume
These keys allow you to adjust the levels of recording input and output volume. (All the modes are the same) The recording levels coming from the INPUT [1] & [2] can REC LEVEL Target setting: select the input source 1 _ 100 which you want to + : Increase reception adjust the recording... -
Page 26: How To Use [Dial] And [Menu] Buttons
[DIAL] and [MENU] buttons are used for various settings while recording and during playback. Here are some basic explanations about each operation. [ DIAL ] Rotate the [DIAL], and the cursor on the display will move along the [DIAL] Select Press down [DIAL], your selection is confirmed. - Page 27 [DIAL] operation on the top screen the top screen, 'cursor' moves. The item letters or numbers are reversed change the numbers justment or calls up the setting menu. a n d l e t t e r s P r e s s your selection.
-
Page 28: Insert A Sd Card
The SD card is required to record. Make sure to turn off power before inserting or removing the SD card. NOTE: destroy the data. the slot. ht tp://www. zoom. co. jp/ when booting - up. computer, digital camera or other machine, formatting in the H4n is required. -
Page 29: Set Date And Time
Each file will automatically record the date/time. To facilitate searching for files by date, be sure to set the date/time after every battery change. Press. Select the item on <DATE/TIME>: Select <SYSTEM> and press. You can select the item while moving [ ] of the [DIAL]. -
Page 30: Setting Up: How To Connect External Audio Devices
The H4n offers versatile connectivity with options for any recording application. Stereo Headphones Monitor... -
Page 31: Setting Up: Built-In Microphones
These are special features of the H4n’s built-in microphones. LOCATION OF THE MICROPHONES UNDER XY SYSTEM Capturing sound in a stereo image. General stereo microphones Stereo images with no phase cancellation. S t e r e o r e c o r d i n g i s o f t e n d o n e b y p l a c i n g t w o microphones in a V shape. -
Page 32: 6-3 Setting Up: Built-In Microphones /Outside Microphone With Plug-In Power
6-3 Setting up: Built-in microphones /outside microphone with plug-in power The input jack for the external microphone is suitable for microphones that require <PLUG-IN> power. Press the [MENU] button for more than 2 seconds, and start Please put H4n 30 - 50 cm away from the When you use the external microphone, be sure to operation from the top screen. -
Page 33: 6-4 Setting Up: Input [1], [2] Connections And Phantom Power Source
6-4 Setting up: INPUT [1], [2] connections and phantom power source Using INPUT [1] and INPUT [2] you can connect to a guitar, a bass, a keyboard, etc. Press the [MENU] button for more than 2 seconds, and start For a guitar or a bass, you can operation from the top screen. -
Page 34: Setting Up: Usb Connection, H4N Used As An Audio Interface
Setting up: USB connection, H4n used as an Audio Interface The H4n can be used as a two-in/two-out USB interface at 44.1kHz or 48kHz. Connect H4n to and press. Connect H4n displayed input or output level to computer with USB cable. Press on the top screen. - Page 35 NOTE: rate while computer is recognizing H4n as an audio interface. Press. matches the recording software and playback file. EFFECT recording and playback. TUNER HINT: MONITOR PHANTOM PLUG-IN DISCONNECT signals directly to and from your Select and press. nals. sampling rate is set to 44.1kHz. When you select an input the corresponding To monitor input signals, you must turn the interface.
-
Page 36: 6-6 Setting Up: Usb Connection, H4N Used As A Sd Card Reader
6-6 Setting up: USB connection, H4n used as a SD card reader When you use the H4n as a SD card reader, make the following settings. NOTE: be sure to perform the “safely remove hardware” function on the Press on the top screen. this function may damage files. -
Page 37: Setting Up: Built-In Speaker
The H4n is equipped with a built-in mono speaker. This is a mono speaker for playback. Without connecting headphones to [LINE/PHONE] jack, you can easily playback the recorded data and listen. NOTE: HINT: there is no output of the input signals. The built-in speaker cannot be used mode. -
Page 38: About H4N Modes
There are four operational modes in H4n: STEREO/STAMINA, 4 CH (CHANNEL), MTR (MULTI TRACK) mode. You can choose the mode according to your need. You can easily create a stereo recording This mode allows for longer battery In 4Ch mode, you can record two You can record using effects. -
Page 39: Selecting A
Be sure to select the appropriate mode for your application. HINT: Press. when turned off. STEREO indicator MODE STAMINA mode display here. mode, use the switch located in the battery compartment. -
Page 40: Details About Modes
Input and output levels as well as saving and formatting data are different in each mode. In STEREO mode, you can select 2 different inputs In 4CH MODE the H4n records two stereo You can record tracks in MONO or STEREO from either INPUT[MIC] or INPUT[1] and INPUT[2], WAV files: one stereo WAV file for the built-in INPUT [1], INPUT [2] or the internal microphones. -
Page 41: Mode> Screens: Stereo And Stamina Modes
Counter REMAINING BATTERY LIFETIME during battery running Recording lapse and playback lapse: Display: 00(time):00(minute):00(second):000(1/1000second) Recording Standby blink it is time to change battery. [REC] button [REC] button blinks lights on blink FILE NAMES during selecting, recording and playback work. The clip meter light turns on when the recording Indicator of option settings: ON or OFF and playback level reach 0dB and remains lit until the file ends or the stop button is pressed. -
Page 42: Mode> Screen: 4Ch Mode
Counter REMAINING BATTERY LIFETIME during battery running Recording lapse and playback lapse: Display: 00(time):00(minute):00(second):000(1/1000second) Recording Standby blink it is time to change battery. [REC] button [REC] button blinks lights on blink FILE NAMES during selecting, recording and playback work. Indicator of option settings: ON or OFF The clip meter light turns on when the recording and playback level reach 0dB and remains lit until When each optional function is ON, display... -
Page 43: Mode> Screen: Mtr Mode
on the top screen Counter Recording lapse and playback lapse: Counter Function: Display: 00(time):00(minute):00(second):000(1/1000second) Appoint time Recording Standby [REC] button Cursor only when recording lights on blink REMAINING BATTERY LIFETIME during battery running [ALWAYS NEW] setting [REC] button only when recording blinks blink <ALWAYS NEW>... -
Page 44: Mode> Screen: Main Menu
The Menu icon list is displayed by [MENU] button. Press. and press. - Page 45 In the recording and playback menu, the current re- cording condition is displayed at the bottom left of the screen. On the right bottom of the screen the current folder number i s d i s p l a y e d ( O n S t e r e o , 4 c h a n d the unit when operating with battery power.
-
Page 46: Option: Remote Control Operation
When you use the optional remote controller, you can operate the H4n from a distance. Stop counter resets to 0. Start recording and the counter begins to Recording Standby move VOLUME Recording Playback INDICATOR (red) 0-100 [REC] button * This can be used only when the recording standby track available. 1-100 INPUT buttons, [MIC] [1] [2] +: increase reception... -
Page 47: Operations
Operations... -
Page 48: Setting / Recording: Set Input Source And Recording Level
Setting / Recording: Set input source and recording level Control settings for the targets, built-in microphones or external input jacks. Use both [MIC] and INPUT [1] [2] stereo input. Use the stereo input source of either [MIC] or INPUT [1] [2]. Built-in Microphones Both light All lights on... - Page 49 Any of tracks 1-4 can be set for mono or stereo input. SELECT the input per track one by one and adjust. Use the REC LEVEL SELECT the input to 2 tracks and adjust. HINT: TRACK 1 TRACK 2 TRACK 4 multiple passes.
-
Page 50: Setting / Recording: Recording In Stereo And Stamina Mode
Setting / Recording: Recording in STEREO and STAMINA mode [RECORDING DIRECTION] press. press. The number figures rotate. a new file light blinks name here light on blinks the source Select an input press. source and press. stop, Start recording again, The counter returns back to 0. - Page 51 HINT: Recorded files are named light blinks record in 19 different file for- a u t o m a t i c a l l y. Yo u c a n Press choose from two formats: Recording format must be b u t t o n w h i l e re c o rd i n g .
-
Page 52: Setting / Recording: Recording Format
Setting / Recording: Recording format <REC FORMAT> NOTE: high quality sound recording. Because data is not Press. compressed, the volume of the file will increase 44.1kHz/16bit 44.1kHz/24bit 96kHz/16bit capacity and to record much more sounds. 96kHz/24bit HINT: 64kbps rate of the analog-to-digital conversion. 16/24-bit 96kbps indicates the bit depth of the analog-to-digital con- 112kbps... -
Page 53: Setting / Recording: File Name
Setting / Recording: File name <FILE NAME> Press. 4CH mode: NOTE: mode. Select and press. The initial notation <FILE RENAME>... -
Page 54: Setting / Recording: Recording On 4Ch Mode
This is the method to record 4 channel stereo sounds coming from the built-in mic and the external input jack. [RECORDING DIRECTION] of the input sources. press. press. The number figures rotate. a new file name here light blinks light on blinks the source. - Page 55 HINT: On 4CH mode the input from If you want change, operate before light blinks t h e b u i l t - i n a n d t h e e x t e r n a l recording.
-
Page 56: Setting / Recording: Recording In Mtr Mode
Change to <REC MODE>, <OVERWRITE/ ALWAYS NEW> Press. and press. the source the source Start recording * This means you can record without this setting. - Page 57 1. Input source comes from either INPUT [1] or INPUT [2]. 1. Input source comes from either INPUT [1] or INPUT [2]. The same signals are sent to both tracks. 2. Input sources come from both [MIC]s or INPUT [1] & [2]. 2.
-
Page 58: Setting / Recording: Recording
Setting / Recording: Recording <OVER WRITE> in MTR mode You can select from two recording modes. Choose the appropriate Input setting … P .055 settings for your application Recording functions press. light on The selected press. displays input level Press. light off light on You can get back to the beginning of the file with the REW button.In Mtr Mode -
Page 59: Setting / Recording: Recording
Setting / Recording: Recording <ALWAYS NEW> in MTR mode Choose the appropriate Input setting … P .055 settings for your application Recording functions press. light on The selected TRACK light on. press. displays input level Press. light off blink Counter return back to 0. The PLAY/PAUSE button will allow you to listen back to the recorded file.In Mtr Mode -
Page 60: Setting / Recording: Track Menu In Mtr Mode
HINT HINT: Select a target project and start ……P.119 Set the output level of a track On the top screen select 'TRACK MENU ICON' and press. file names allocated to tracks fader Icon changes pan Icon changes currently selecting track... - Page 61 Only on MTR MODE NOTE: NOTE: NOTE: not available during recording, playback and also when tracks are armed. HINT: returns to the previous one. HINT: Setting stereo link on creates a stereo track from tracks Select <STEREO LINK> and press. Select <KARAOKE>...
-
Page 62: Setting / Recording: Re-Recording,
Setting / Recording: Re-recording, <PUNCH IN/OUT> automatic On the top screen select 'TRACK MENU ICON' and press. Select PUNCH IN _ PUNCH OUT ICON and press. Find the desirable position for ‘PUNCH IN’ Select any desirable <FILE> and press. and press. Icon interchanges...Automatic - Page 63 Only on MTR MODE NOTE recording. Press the desirable position for ‘PUNCH OUT’. confirmed the light is on during recording and blinks during record standby. PLAY PLAY Start Stop the practical re-recording parts HINT: recording will start. stopped by using the counter. First set each time and move blink and recording will stop.
-
Page 64: Setting / Recording: Re-Recording,
Setting / Recording: Re-recording, <PUNCH IN/OUT> manual during playback, from that pressed position you can start re-recording. On the top screen select 'TRACK MENU ICON' and press. light on Select any desirable <FILE> and press.Manual - Page 65 Only on MTR MODE light off light on PLAY PLAY Start Stop...
-
Page 66: Recording Function
The H4n can detect when the input level surpasses your predetermined level, and can automatically start recording from the recording standby position. HINT: Display of “Wait for Signal” Press. Signal” appears during recording standby. That watches whether the present input level goes over the recording start level. -
Page 67: Recording Function
Press. Set the input level at which recording will stop HINT: Select <AUTO STOP> and press. appears during recording. Select <AUTO REC> and press. Stop level Present input level NOTE: Select <STOP LVL> and Press. function during recording and playback. i s o n , y o u c a n f i n i s h recording with pressing recording after the signals have be-... -
Page 68: Recording Function
previous 2 seconds to your recording. Press. HINT onds before the record button is pressed. Select <PRE REC> and press. NOTE... -
Page 69: Recording Function
Select the setting input source. Press. Select the cutoff frequency. HINT: numbers, you should verify the outcome before recording. -
Page 70: Recording Function
level input signals are lifted up and high level input signals are controlled down when recording. Select the setting input source. Press. Select the setting target. HINT: Select <COMP/LIMIT> and press. Standard compressor The compressor can compress Compressor suitable for vocal higher level sounds Compressor suitable for drum and and raise the level. -
Page 71: Recording Function
This function automatically sets the level for recording. HINT: Press. determines the recording levels using the signal present dur- ing recording standby. If the volume surpasses 6dB during recording, the input level is automatically adjusted with the new level displayed on the screen for two seconds. Present input level Select <LEVEL AUTO>and press. -
Page 72: Recording Function
screen. Press. Select <INPUT> and press. HINT: Select <MONITOR> and press. NOTE: You cannot monitor the input sound through the built-in speaker. -
Page 73: Recording Function
Select <MONO MIX> and press. Press. NOTE:... -
Page 74: Recording Function
Press. <ON / OFF> <MID LEVEL> the recording targets. Select <INPUT> and press. Select Select Select <MS MATRIX> and press. Select Make each setting accordingly. - Page 75 NOTE: <SIDE LEVEL> <SOURCE> <CH SETTING> You cannot use this function inputs between 12.0dB Select Select Select Select Select...
-
Page 76: Tuner
The H4n features a tuner with multiple tuning modes. Press. The indicator shows the input signals are higher or lower than the High T h e s e d o t s s h o w h o w much gaps exist between the input signals and the nearest one to the input signals. -
Page 77: Tuner, All Other
Press. The indicator shows the input signals are higher or lower than the High These dots show how much gaps between the input signals and the String number currently selected. HINT: the tuning target. Select the tuning mode and press. NOTE: Display of tuning Relationship between string numbers and notes... -
Page 78: Tuner
This function allows you to calibrate the tuner. Press. HINT: NOTE:... -
Page 79: Tuner
Only on 4CH MODE In 4CH mode you can select the input source for the tuner. HINT: String number/ note name Tuner type BASS Select input source and press. NOTE:... -
Page 80: Metronome
The metronome has other convenient functions such as click, pre-count, tempo, sound, etc. Press. <CLICK> <PRE COUNT> This setting turns the metronome on or off dur- Set the count number just before the ing recording, playback or both. This setting beginning of recording. - Page 81 NOTE: The metronome starts at the beginning of recording and playback. If you start in the middle of a song or track, the metronome beats may not be in sync with the song. <TEMPO> <SOUND> <PATTERN> <LEVEL> Set the metronome speed. Set the metronome tone.
-
Page 82: All About Effect
Select the pre-set that’s closest to your desired sound. Edit the modules Adjust the level of the patch Change the name of the patch Select modules <PRE AMP> <EFX> Adjust the parameter Store the contents of editing : <STORE>... - Page 83 Only on MTR MODE change corresponding to the input sources and recording tracks. One recording...
-
Page 84: Effect
Only on MTR MODE Select No. : PATCH NAME and press. Press. will show off. Select PATCH and press. patch list NOTE: Pressing [MENU] for more than two seconds returns you to the top screen. 60 patches are available programmed. -
Page 85: Effect
Only on MTR MODE You can create your own patch by combining effects and adjusting the parameter settings. Select the desired sound No. <PRE AMP> <LEVEL> Adjust PATCH level. guitar and bass amp model- ing effects. <RENAME> <EFX> lation, chorus and delay ef- fects., Patch Edit -
Page 86: Effect
Effect <EDIT (PRE AMP) >, editing PRE AMP modules Only on MTR MODE ICON PRE AMP MODULE CONDITION EFFECT TYPE: SET THE AMP TYPE and press. PRE AMP module PARAMETER..., Editing Pre Amp Modules -
Page 87: Effect
Only on MTR MODE ICON HINT: PRE AMP MODULE CONDITION modules, make setting after changing the module status is OFF, no parameters or settings are shown. When OFF, you cannot select modules. and press. EFX module PARAMETER..., Editing Efx Modules -
Page 88: Effect
Only on MTR MODE Adjust the levels of the patch and change the name. press. press. and press. NOTE: the patch. To return to the top without saving the edit/... -
Page 89: Effect
Only on MTR MODE NOTE: the current patch. To save without overwriting an exist- ing patch, select an empty tion. Patch changes are only stored for the current project. -
Page 90: Effect
and press. and press., Taking In A Patch From Another Project - Page 91 Only on MTR MODE The patch selected at step6 is now imported to the present project. Select an import patch and press. NOTE: Project!” display will appear when there is HINT: S t a r t i m p o r t i n g...
-
Page 92: A Sing-Along Machine
Prepare the stereo files for the Select TRACK MENU icon and press. Select TRACK MENU icon and press. Select 'TRACK MENU ICON' and open the 'TRACK MENU' Select <KARAOKE> and press. [Adjustment of the Karaoke tracks] Select an optional file and press.Preparation - Page 93 Only on MTR MODE Make CENTER CANCELATION of the KARAOKE track Select TRACK MENU icon Select TRACK MENU icon and press. and press. HINT: Select <CNT CANCEL> and press. TRACK are different from a (LEVEL) (CNT CANCEL) (KEY) Convert that into <ON> and press. (FINE) (FILE) (KARAOKE)
-
Page 94: A Sing-Along Machine
A sing-along machine <KARAOKE> recording Only on MTR MODE A slight adjustment of KARAOKE TRACK KEY. Select TRACK MENU icon and press. to the connected input jack. Select the track menu icon and press. Press ‘PRACTICE’ (no recording). NOTE: Make adjustment and press. Press [REC] button and make You cannot use this function recording standby condition.Recording -
Page 95: Playback : Playback Files (Stereo, 4Ch And Stamina Modes)
Playback : Playback files (stereo, 4ch and stamina modes) If you prefer to call up the files for later playback, take the following steps. Select <SELECT> and press. Press. Press. You can select the file in the folders on the top screen. "Short cut"... -
Page 96: Playback :
Aside from general playback, you can also select Press. Press. Select <PLAY MODE> and press. Select a play mode and press. Playback all the files in the folder. Playback one file. Playback repeat of one composition only. Playback all files in the folder. NOTE: Select desirable mode. -
Page 97: Playback : Setting Marks
You can move easily to the spot during playback. How to playback the marked file You can move to the marked position files with marks. Current position NOTE: HINT: create marks. Ref. <MARK LIST>... -
Page 98: Playback :
Press. point A moves. Select <AB REPEAT > and press. A mark is placed at point A, then mark B appears and moves until set Playback continues repeatedly between the indicated locations. HINT:... - Page 99 HINT: NOTE: After setting up A and B you cannot make any settings you can cancel all settings. the button for less than 2 seconds (quick a mark, it will move to the marked point. a long press. more than 2 seconds you can move to a desired point.
-
Page 100: Playback :
Only on STEREO MODE You can adjust playback speed of the file. "Short cut" Pressing TRACK on the top screen. Press. You can set up playback Select <TOOL> and press. NOTE: Select <SPEED> and press. HINT: screen of each mode. -
Page 101: Playback :
Only on 4CH MODE Press. press. Indicates if you are modifying name of parameter where the cursor is positioned and its setting value fader Icon pan pod Icon the cursor setting the after setting, confirm parameter with the icons... -
Page 102: Playback : Playback Files (Mtr Mode)
Only on MTR MODE assign them to tracks and play them back simultaneously. Initial recording Press. Press. Press. Press. Press. recording OVER WRITE Press. ALWAYS NEW Press. allocate random files Ref. <TRACK MENU>... -
Page 103: Playback : Appointing Time With A Counter
Only on MTR MODE Select the figures according Select the counter to the appointing figures on the top screen and press. counter Change the figures and press. HINT... -
Page 104: Edit / Output :
Select the folder that contains your targeted file. Press. "Short cut" Pressing TRACK on the top screen. Select an optional folder and press. NOTE: HINT: present folder... -
Page 105: Edit / Output :
Selecting playback files from the file list. Press. "Short cut" Pressing TRACK on the top screen. Select an optional file and press. HINT: the top screen. button on the top screen. -
Page 106: Edit / Output :
This function displays the selected file information. SELECTING THE FILES…P.104 <FILE SELECT> The recorded date of the file, or the renewal date when it created by PC or other device. The format of the file. The recording time of the file. -
Page 107: Edit / Output :
SELECTING THE FILES…P.104 <FILE SELECT> a deleting file NOTE: Caution; Once deleted, you cannot retrieve the file. -
Page 108: Edit / Output :
SELECTING THE FILES…P.104 <FILE SELECT> The name of the folder or the project to delete files. NOTE: Once deleted, you cannot retrieve the file. -
Page 109: Edit / Output :
Only on MTR MODE This function is useful when you want to preserve the original master copy. Press. Select your desired file and press. HINT: can change that if necessary. Ref. <FILE RENAME>... -
Page 110: Edit / Output :
SELECTING THE FILES…P.104 <FILE SELECT> Select. Press. [Make change of each letter or number.] Select and press. change is confirmed select the letter to be changed and then the letter is reversed... - Page 111 HINT: NOTE: In case of two files with the same name. The display follow the next order: shows "This file name already exists!", the screen returns has more than 12 letters, a to the previous one and you triangle mark appears telling will need to create a different name.
-
Page 112: Edit / Output :
Only on STEREO MODE SELECTING THE FILES…P.104 <FILE SELECT> HINT: the screen says “The file name already exists!”, select press. different name. Bit rate that can be selected unit : kbps Ref. <FILE RENAME>... - Page 113 This function automatically adjusts the volume level of a recorded file for enhanced sound quality and audio consistency. SELECTING THE FILES…P.104<FILE SELECT> NOTE:...
- Page 114 SELECTING THE FILES…P.104 <FILE SELECT> You should select to make MIXER settings effective when you start encoding. and press. Select and press. Ref. <MIXER> means to make setting effective. means to inactivate setting, in other words mix two files 1:1...
- Page 115 Only on 4CH MODE HINT: Select the folder on STEREO mode You cannot have two files to save the encoded files. with the same name. If the screen says “File name exists!”, and press. up a different name. Select the <SAVE IN> folder and press. The encoded files are stored in the folder.
- Page 116 SELECTING THE FILES…P.104 <FILE SELECT> press. HINT: processing does not go in time and Sound dropout happens. and when the work is heavy, STEREO MODE 4CH MODE This mark shows sounds it often happens. In that case, dropout happening. Heavy The mark the user created.
- Page 117 Only on STEREO MODE SELECTING THE FILES…P.104 <FILE SELECT> STOP of the file Holding the button Press. for more than one one second. The marked file moves to the HINT: Below: the current time in the file. name.
- Page 118 NOTE: This function is used to move files to a different folder or mode. Only stereo files can move to SELECTING THE FILES…P.104 <FILE SELECT> cannot move to the stereo fold- ers. 4CH folders. you need 44.1 kHz/16bit for- mat. the other format, the screen Format Only! ”.
- Page 119 Only on MTR MODE HINT: Press. press. projects automatically. Select <PROJECT> and press. number. name in multiple projects Select the letter to change and press. Select <NEW PROJECT> and press. SELECT <EXECUTE> and press. You can create a maximum of qrstuvwxyz{¦}˜...
- Page 120 Only on MTR MODE and press. Press. press. press.
- Page 121 Only on MTR MODE This function will delete a project. Press. deleted and press. press. NOTE: Once deleted, you cannot retrieve the project. HINT: press. You cannot delete a project under protection. You need to release it from protection before delete operation. Ref.
- Page 122 Only on MTR MODE You can change the name of the project. Select the letter to change and press. Press. Select <PROJECT> and press. Change the letter and press. Select <RENAME> and press. HINT: ects automatically. the following order: in multiple projects.
- Page 123 Only on MTR MODE Copy the project and create a new project with a new number. Select a target project and start operation.…P.119 Press. HINT: Automatically displays the lowest unused number <PROJECT(RENAME)>...
- Page 124 Select a target project and start operation.…P.119 Select the name to bounce to. * If you have no change, proceed to next. top screen and press. when you do not change the name, automatically given a file name: <FILE RENAME>...
- Page 125 Only on MTR MODE HINT: together the various music data divided in different tracks and files into the stereo or monaural files. Select the file type and press. operation, a new file will be created in the same project. NOTE: You cannot use this setting during recording and playback.
- Page 126 Only on MTR MODE in that project. Select a target project and start operation.…P.119 Press. The mark shows the protected projects. NOTE: If you try to change a file allocated in a track, the screen will say "Project Protected". HINT: setting of the completed music might be changed mistakenly.
- Page 127 Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. press. Switch off the light all the time. Switch on the light all the time. operation. press. operation. NOTE: You cannot use this setting during recording and playback.
- Page 128 Adjust the display contrast. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. and press. press. A higher the number corresponds to more contrast. weak get lighter strong get darker press. NOTE: You cannot use this setting during recording and playback.
- Page 129 By setting your battery type, H4n can correctly display the remaining lifetime of the battery. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. press. press. Alkaline battery press. NOTE:...
- Page 130 After it starts, the version of H4n can be confirmed. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. NOTE: system version You cannot use this setting during recording and playback. boot program version...
- Page 131 Returns all the settings back to the original default condition. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. press. and press. NOTE: settings stored in this unit will be deleted and the settings will return to the original default condition.
- Page 132 Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. NOTE: approximate remaining capacity You cannot use this setting during recording and playback. Remaining recording time on the current recording format.
- Page 133 Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. press. HINT: ted for the H4n, during boot up the NOTE: press. deleted. should be formatted by the H4n before using. SD card of H4 and H2...
- Page 134 you can download H4n software upgrades. You can verify H4n version The version of the main body system To set-up connection of H4n and PC, connect with USB cable. You can operate H4n through PC. Connect H4n to PC with and press.
- Page 135 the H4n. NOTE: H2/H4 unit. it is displayed for H4 as H4. the highest numbered project. after transfer, the unit says, “Project Full ! ” and stop moving. number in H4n and continue the transfer. HINT: If there is the same file name in the moving folder, operate <...
- Page 138 STEREO MODE STAMINA Recording Format those total 4 tracks can be combined Maximum Track 2 tracks Numbers on Simultaneous Recording Limitation on File Capacity Always save the initial one Always save the initial one Select either overwrite recording Always save as the initial one File Making During Recording impossible to overwrite impossible to overwrite...
- Page 139 STEREO STAMINA STEREO STAMINA STEREO STAMINA DATE/TIME LO CUT NEW PROJECT BACK LIGHT COMP/LIMIT SELECT LCD CONTRAST MONITOR RENAME BATTERY TYPE REC LEVEL AUTO COPY FACTORY RESET MONO MIX DELETE MS STEREO MATRIX STEREO STAMINA STEREO STAMINA PHANTOM FORMAT PUNCH IN/OUT REMAIN STEREO STAMINA...
- Page 140 RECT VNT (7) ZNR OFF, Adjusts the sensitivity of the noise reduction circuit DZ DRIVE (ZOOM Noise Reduction) TS+FDcmb Combination of Fender Combo amp and Ibanez TS-9 registered trademarks of their respective owners. The names are used only to illustrate SD+MSstk FZ+MSstk The above 12 effect types have the same parameters.
- Page 141 Adjusts the level of the signal after passing the (8) ZNR OFF, Adjusts the sensitivity of the noise reduction circuit (7) LEVEL (ZOOM Noise Reduction) (8) ZNR OFF, Adjusts the sensitivity of the noise reduction circuit (ZOOM Noise Reduction) registered trademarks of their respective owners. The names are used only to illustrate...
- Page 142 Modulation effect types This is a compressor which attenuates high-level signals This is an auto wah effect that tracks the input signal RackComp AUTO WAH and boosts lowlevel signals. intensity. (1) THRSHOLD Adjusts the threshold level of the compressor. Before, (1) POSITION After (2) RATIO...
- Page 143 This effect produces a metallic ringing sound. Adjusting the This effect produces a resonating and strongly undulating RING MOD FLANGER sound. (1) DEPTH Adjusts the modulation depth. Before, (1) POSITION After (2) RATE Adjusts the modulation rate. Ref. P144 (2) FREQ Adjusts the modulation frequency.
- Page 144 This effect lends spatial depth to the sound by reproduc- This effect varies the sound like a talking modulator. ing the ambient atmosphere of a room. Adjusts the frequency range in which the effect (1) SIZE Adjusts the size of the simulated space. (1) RANGE operates.
- Page 145 This is a reverse delay with a long delay time of up to [Table] RvsDelay Parameters with a < (1) TIME Adjusts the delay time. ( ms,* (2) FEEDBACK Adjusts the feedback amount. Adjusts the delay sound damping characteristics (3) HIDAMP Half triplet Quarter note Thirty-second...
-
Page 146: H4N Patch List
H4n patch list Effect patches in this page" Patch List" can be used in 4track mode and audio interface func- tion. (with sampling rate in 44.1kHz ) Category Fender Clean Basic clean sound optimized for recording. FD CLEAN Natural Cho ENSEMBLE FunkyCutting FD CLEAN... - Page 147 Category Hartke HARTKE Bass Bassman BASSMAN SuperBass SUP-Bass SANSAMP SANSAMP Studio Pre Straightforward tube preamp sound is highly versatile. TUBE PRE Pick Bass HARTKE Chorus Bass Sound with chorus blend, suitable for melody playing. BASSMAN ENSEMBLE Slap Comp RackComp Flanging bass sound such as used in Fusion music. Flange Bass TUBE PRE FLANGER...
-
Page 148: H4N Products Spec
H4n products spec recording tracks Sampling frequency 44.1 kHz playback tracks Recording time Recorder * Recording times are approximations. Actual times may differ according to recording conditions. Input impedance simultaneous recording file size Input level Inputs Projects 1000/card Built-in stereo mic Other functions Punch-in/out, Bounce, A-B repeat Input impedance... - Page 149 If there are problems during operation of the H4n, check the following points first. P.020). protected. Slide the write-protect switch to the non-protected position. When playback is carried out with a track in recording standby condition, a temporary file is created in the H4n. If the remaining capacity of the SD card is low, the temporary file may use up all the remaining space, causing playback to stop.
- Page 150 Copyright warnings Playback operation Recording operation Connections AB repeat COPY Battery/Power outlet setting Bit rate Built-in microphones Built-in speaker...
- Page 151 On-mic recording Over write recording mode Phantom power Preparation Recording Plug-in power Always new recording mode Power On and Off Over write recording mode Playback operations Recording operations COPY Auto Off-mic recording...
- Page 152 Playback operation H4n used as an Audio Interface Recording operation Recording track selection Playback operation Recording operation Safety precautions for users Setting Audio Interface, use as CARIB Software version upgrading...
- Page 153 This equipment has been tested and found to comply with the limits harmful interference to radio communications. However, there is no for a Class B digital device, pursuant to Part 15 of the FCC Rules. guarantee that interference will not occur in a particular installation. These limits are designed to provide reasonable protection against If this equipment does cause harmful interference to radio or televi- harmful interference in a residential installation.
- Page 154 ITOHPIA Iwamotocho 2chome Bldg. 2F, 2-11-2, Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032, Japan Web Site: http://www.zoom.co.jp...
- Page 155 4" icon shown on the desktop. To bring up the "Sound" window, select "Control Panel" from the The ZOOM H4 ASIO driver software is required to enable use of Start menu and click "Hardware and Sound", then click "Sound". Cubase LE 4 for audio input and output with a computer. Refer to the Install Cubase LE 4 on the Macintosh.
- Page 156 MacOS X Windows Vista / XP Cubase LE 4 installation Connections and preparation Use Cubase LE 4 to record Continued from front From the "Devices" menu of Cubase LE 4, select "VST HINT Check the recorded content. Connections" and select the device containing the When the monitoring button is enabled, the level meter next to the string "Zm In (Out)"...
- Page 157 The ZOOM H4 ASIO driver software is required to enable use of Install Cubase LE 5 on the Macintosh. Cubase LE 5 for audio input and output with a computer. Refer to the To bring up the "Sound"...
- Page 158 Windows MacOS X Continued from front Cubase LE 5 installation Connections and preparation Use Cubase LE 5 to record From the "Devices" menu of Cubase LE 5, select "VST HINT Check the recorded content. Connections" and select the device containing the When the monitoring button is enabled, the level meter next to the string "H4 In (Out)"...