Setting The Date And Time (Date/Time) - Zoom H4n Pro Operation Manual

5-2

Setting the date and time (DATE/TIME)

Each file will automatically record the date/time.
To facilitate searching for files by date, be sure to set the date/time after every battery change.
1
Press.
2
Select SYSTEM and press.
3
Select DATE/TIME and press.
5
Select OK and press.
4
Set YEAR ➝ MONTH ➝ DAY ➝ TIME
(hour: minute: second)
Select the item on DATE/TIME:
Press the DIAL.
The selected item value is highlighted.
Change the value.
Press the DIAL.
The cursor appears again.
Turn the DIAL to
select the item.
NOTE:
If "Reset DATE/TIME" appears
during startup,
needs to be set.
Turn the DIAL to
set the value.
• If no power source is connected
for more than three minutes, the
DATE/TIME setting will reset to
the default value.
• You cannot set this during
recording and playback.
the date/time
026