Zoom H4next Operation Manual

Handy recorder

Hide thumbs Also See for H4next:

Operation manual (158 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

page of 156

/ 156
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual See also: Operating Manual

OPERATION MANUAL

Reproduction of this manual, in whole or in part,by any means, is prohibited.

Table of Contents

Summary of Contents for Zoom H4next

Page 1: Zoom Corporation
OPERATION MANUAL © ZOOM Corporation Reproduction of this manual, in whole or in part,by any means, is prohibited.
Page 2: Special Features Of H4N
Special features of H4n Thank you very much for purchasing our ZOOM H4n Handy Recorder (hereinafter abbreviated to H4n). The H4n has the following special features. • An all-in-one handy recorder. • XLR/standard phone combo jacks allow connection of microphones and guitars directly.
Page 3: The H4N Is Ideal For The Following Scenarios
The H4n is ideal for the following scenarios Vocal recording Recording acoustic guitar sound Piano recitals Live performance recording The band practices Transfer analogue sound sources to digital sources Recording the meetings Any field sound recording Drum practice recording...
Page 4: Table Of Contents
A table of contents Special features of H4n �� 001 6-3 Setting up: Built-in microphones /outside microphone with plug-in power � 031 The H4n is ideal for the following scenarios �� 002 6-4 Setting up: INPUT [1], [2] connections and phantom power source �� 032 A table of contents ��...
Page 5 1-06-3 Setting / Recording: Recording <ALWAYS NEW> in MTR mode �� 058 3-03-5 Effect <EDIT (EFX) >, editing EFX modules �� 086 1-07 Setting / Recording: TRACK MENU in MTR mode �� 059 3-03-6 Effect <EDIT (LEVEL/RENAME) > �� 087 1-08-1 Setting / Recording: Re-recording, <PUNCH IN/OUT> automatic �...
Page 6 Reference 5-09 Edit / Output : <FILE NORMALIZE> �� 112 5-10 Edit / Output : <FILE STEREO ENCODE> �� 113 Main spec list by mode �� 137 5-11 Edit / Output : <MARK LIST> �� 115 Available setting menu list by each mode �� 138 5-12 Edit / Output : <DIVIDE> ��...
Page 7: Safety Precautions For Users
• Make sure to use only an AC adapter, DC5 center and can corrupt or destroy data. Care should be taken to plus 1A (ZOOM AD 14 A/D).The use of other • The H4n is a precision instrument. Do not exert minimize the risk of damage.
Page 8: Copyright Warnings
Copyright warnings Recording of live performances Many artists and most live venues do not allow recording and photography and will check for cameras and recorders at the entrance. Even if recording is allowed, it is prohibited to sell, distribute, or upload to the Internet without the organizer’s authorization.
Page 9: Getting Started
Getting started...
Page 10: Recording Flow Using The H4N
1-1 Recording flow using the H4n The following is the basic flow of recording operation for the H4n. Depending on the object and purpose of the recording, you can select various mode settings for optional quality recording. With the H4n on-board guitar and mic modeling, multi-track recording capability, and the ability to use your own microphones, you can adapt the H4n to any situation and enjoy numerous recording styles.
Page 11 RE-RECORDING Playback RECORD Edit·Output (Recording again and confirm from scratch) 5) The H4n has very convenient 6) In MTR mode the punch-in/ 7) The recordings are saved as Recording on STEREO mode/ ways to swiftly review/playback punch-out function enables you FILES and PROJECTS, and you STAMINA mode………P.049 a recording as well as marking...
Page 12: Easy Recording Guide [Stereo Mode]
1-2 Easy recording guide [STEREO MODE] The following is basic recording instructions using the built-in stereo microphone and a built-in speaker on STEREO MODE. Confirm KEEP RECORDING Power switch STEREO STANDBY MODE CONDITION Input from the built-in microphones [POWER] STEREO switch on.
Page 13 ADJUST START STOP PLAYBACK INPUT LEVEL RECORDING RECORDING DECREASE INCREASE [PLAYBACK] [STOP] − Press. Press. Press. Press. light on light off Counter turns Now recording Counter returns 0:00:00:00:000 [BACK PANEL] mark SD CARD remaining capacity low Adjust the input sound rec level [RIGHT PANEL] Temporary Stop Re-recording...
Page 14: Name And Function Of Each Part
2-1 Name and function of each part [FRONT PANEL] [BACK PANEL] 90 / 120° Variable XY Stereo microphones (Built-in) Input jacks for external stereo microphone STEREO/4CH/MTR mode indicator A built-in mono speaker Display equipped backlight Installed holes for a tripod •...
Page 15 [RIGHT PANEL] [LEFT PANEL] [BOTTOM PANEL] DC5V AC ADAPTER jack Optional remote-control jack [DIAL] [LINE/PHONE] output jack [MENU] button Installed hole for a strap VOLUME [ + / − ] REC LEVEL [ + / − ] XLR/STANDARD PHONE XLR/STANDARD PHONE INPUT [1] jack INPUT [2] jack USB port...
Page 16: Installation Of The Attachments And Options
The following attachments are included in the H4n package. Before use, please make sure that you have each attachment (and optional items). SD CARD WINDSHIELD MICROPHONE STAND ADAPTER AC ADAPTER USB CABLE MAIN BODY CASE Instruction manual (ZOOM AD-14A/D) DAW start-up guide Cubase LE4...
Page 17 •How to use the windshield When recording outside in the field, covering the built- in microphones with this windshield, you can emit Remote control wind noise or blast. (Option, sold separately) •How to install a microphone stand Microphone stand adapter(Accessory) Microphone stand Use a microphone adapter (optional attachment) to install...
Page 18: Battery/Power Outlet Setting
: Use in general (Using AC adapter, batteries) ON : Stamina Mode On (Eco-power mode An attached AC adapter when using batteries) Zoom AD-14 Close the battery compartment cover. Use of an AC adapter other * Illustration of closing the battery than the one included may compartment cover.
Page 19 • Battery’s approximate lifetime NOTE: Usable batteries in general use about 6 hours You can use conventional alkaline and nickel metal hydride batteries. Alkaline battery Power supply from USB in stamina mode about 11 hours Connect the USB cable to the H4n while it’s already connected to the computer with the power switch off, and power is automatically * Approximate lifetime when it is used for continuous recording on WAV 44.1 kHz/16bit format.
Page 20: Power On And Off, How To Use Power And Hold Switch
4-1 Power On and Off, How to use power and hold switch POWER ON / BOOTING UP [LEFT PANEL] [Preparation] NOTE Make sure all equipment is turned off. • Before power switch on, lower the volume of instruments and monitors connected to the H4n.
Page 21 POWER OFF / SHUT DOWN HOLD Function [Preparation] The H4n features a HOLD function to make Turn power switch off, first the any button operation inactive, preventing errors monitor system then instruments. during recording. To make HOLD function valid, [Power Off _ Shut down] slide the power switch to HOLD.
Page 22: How To Use The [Rec] And Locator Buttons
4-2 How to use the [REC] and locator buttons Buttons like [REC], [STOP], [PLAY/PAUSE], [FF], [REW] have all different functions according to each MODE. [FRONT PANEL] STEREO/4CH/STAMINA MODE MTR MODE [REC] button [REC] button : Having a recording standby track Enter recording standby mode and Set to overwrite recording Stop...
Page 23: How To Use The Track [1], [2], [3] And [4] Buttons
4-3 How to use the track [1], [2], [3] and [4] buttons The buttons of TRACK [1] _ [4] have different functions according to each MODE. [Front Panel] MTR MODE STEREO/4CH/STAMINA MODE Move to the Switch from ‘RECORDING’ to ‘PLAYBACK’ of the <FOLDER SELECT>...
Page 24: How To Use The Input [Mic], [1] And [2] Buttons
4-4 How to use the input [MIC], [1] and [2] buttons These buttons have different functions depending on the various modes. [FRONT PANEL] STEREO/STAMINA MODE Select INPUT [MIC] or INPUT [1] [2] = the selected one light on. Either you select the INPUT [1] or INPUT [2] button, they will both respond the same Both buttons light up after the selection.
Page 25: How To Use Rec Level And Volume
4-5 How to use REC LEVEL and VOLUME These keys enable to adjust the levels of recording input and output volume. (All the modes are the same) [LEFT PANEL] [RIGHT PANEL] ‘REC LEVEL’ THE ENTIRE MODE IS IN COMMON The recording levels coming from the INPUT [1] & [2] will be adjusted in 100 levels from 1 to 100 with the (+/−) key.
Page 26: How To Use [Dial] And [Menu] Buttons
4-6 How to use [DIAL] and [MENU] buttons [DIAL] and [MENU] buttons are used for various settings while recording and playback. Here are some basic explanations about each operation. The basic operation for [DIAL] [RIGHT PANEL] Rotate the [DIAL] = select an item [ DIAL ] Rotate the [DIAL], and the cursor on the display will move along the [DIAL] Select...
Page 27 The operation when [ ] cursor is on display (Date·Time Setting, Changing File Name Directory, etc) Pressing [DIAL] down, [DIAL] operation on the top screen When you rotate the [DIAL], change the numbers and [ ] moves accordingly. Moving [DIAL] on letters.
Page 28: Insert A Sd Card
• You can use 16MB_2GB and 4_32GB SD card. Regard to up-to-date SD cards please see and check at our ZOOM site: h t t p :/ / w w w.z o o m .c o . jp . "War ning" no SD card in •...
Page 29: Set Date And Time
5-2 Set date and time <DATE/TIME> Each file will automatically record the date/time. To facilitate searching for files by date, be sure to set the date/time after every battery change. Set YEAR➝MONTH➝DAY➝TIME Press. (Time: Minute: Second) Select the item on <DATE/TIME>: Select <SYSTEM>...

Page 30: Setting Up: How To Connect To Outside Machines
6-1 Setting up: How to connect to outside machines H4n can make various connections along with different recording occasions. Remote control (option) Stereo microphones Headphones Monitor SD card INPUT: instrument Mixer (keyboard) INPUT: instrument (microphone) INPUT: instrument Personal computer (PC) (guitar) H4n’s very own AC adapter...
Page 31: Setting Up: Built-In Microphones
6-2 Setting up: Built-in microphones These are special features of the H4n built-in microphones. DIRECTIVITY OF 90°, 120° LOCATION OF THE MICROPHONES UNDER XY SYSTEM Center 90° Collect the sound around centering position. General stereo microphones H4n stereo microphones High quality microphones in an XY pattern ensure a natural stereo image Stereo images with no topology difference when recording sounds.
Page 32: Setting Up: Built-In Microphones /Outside Microphone With Plug-In Power
6-3 Setting up: Built-in microphones /outside microphone with plug-in power The input jack for the external microphone is suitable to <PLUG-IN> power uses. [How to make setting of <PLUG-IN> power] Close microphone recording External microphone recording Press the [MENU] button for more than 2 seconds, and start Please put H4n 30 - 50 cm away from the When you use the external microphone, be sure to...
Page 33: Setting Up: Input [1], [2] Connections And Phantom Power Source
6-4 Setting up: INPUT [1], [2] connections and phantom power source Using INPUT [1] and INPUT [2] you can connect to a guitar, a bass, a keyboard, etc. [How to make setting of <PHANTOM> power] Connecting to instruments Press the [MENU] button for more than 2 seconds, and start For a guitar or a bass, you can operation from the top screen.
Page 34: Setting Up: Usb Connection, H4N Used As An Audio Interface
6-5 Setting up: USB connection, H4n used as an Audio Interface When you use the H4n as an Audio Interface (AUDIO I/F), make the following settings. From Connect H4n to Select <FREQUENCY> power ON computer with USB cable. and press. Connect H4n displayed input or output level to computer...
Page 35 NOTE: • You cannot change a sampling rate while computer is recognizing [Button operation during setting and <AUDIO I/F> menu] H4n as an audio interface. [You can use those • To connect as an Audio I/F, make buttons during setting] sure that a sampling rate (step 6) Press.
Page 36: Setting Up: Usb Connection, H4N Used As A Sd Card Reader
6-6 Setting up: USB connection, H4n used as a SD card reader When you use the H4n as a SD card reader, make the following settings. NOTE: After it’s powered ‘ON’, From connect the H4n to the computer • Before physically unplugging USB power ON with the USB cable.
Page 37: Setting Up: A Built-In Speaker
6-7 Setting up: A built-in speaker The H4n is equipped with a built-in mono speaker. H4n built-in speaker This is a mono speaker for playback. Without connecting headphones to [LINE/PHONE] jack, you can easily playback the recorded data and listen. NOTE: HINT: There is no output when [LINE/...
Page 38: About H4N Modes
7-1 About H4n modes There are four operational modes in H4n: STEREO/STAMINA, 4 CH (CHANNEL), MTR (MULTI TRACK) mode. You can choose the mode according to your need. • STEREO mode • STAMINA mode • 4CH mode • MTR mode You can easily create a stereo recording This is an economical mode to make In 4CH mode, you can simultaneously...
Page 39: Selecting A And Its Confirmation
7-2 Selecting a <MODE> and its confirmation To plug in external machines, be sure to select the suitable mode depending on your purpose. HINT: Press the [MENU] button for more than 2 seconds, and start Confirmation of the mode operation from the top screen. •...
Page 40: Details About Modes
7-3 Details about modes Input and output levels as well as saving and formatting data are different in each mode. STEREO mode 4CH mode MTR mode STAMINA MODE In STEREO mode, you can select 2 different inputs When both INPUT[1] and INPUT[2] are used at the You can combine tracks with the INPUT[1], either INPUT[MIC] or INPUT[1] and INPUT[2], same time, play back.
Page 41: Mode> Screens: Stereo And Stamina Modes
8-1 <MODE> screens: STEREO and STAMINA modes • Explanation of the top screen Display of recorder’s condition Counter REMAINING BATTERY LIFETIME during battery running Recording lapse and playback lapse: STOP Display: 00(time):00(minute):00(second):000(1/1000second) Recording Standby When the display of “Low Battery” is sown, it blink is time to change battery.
Page 42: Mode> Screen: 4Ch Mode
8-2 <MODE> screen: 4CH mode • Explanation of the top screen Display of recorder’s condition Counter REMAINING BATTERY LIFETIME during battery running Recording lapse and playback lapse: STOP Display: 00(time):00(minute):00(second):000(1/1000second) Recording Standby When the display of “Low Battery” is sown, it blink is time to change battery.
Page 43: Mode> Screen: Mtr Mode
8-3 <MODE> screen: MTR mode • Explanation of the top screen [DIAL] operations ➀ ➁ ➂ ➃ on the top screen Counter Display of recorder’s condition ➀ Recording lapse and playback lapse: Counter Function: STOP ☞ Ref. P.102 Appoint time Display: 00(time):00(minute):00(second):000(1/1000second) Recording Standby A t o n e t i m e...
Page 44: Mode> Screen: Main Menu
8-4 <MODE> screen: MAIN MENU Menu item list displayed by [MENU] button. <FOLDER> <FILE> <INPUT> <REC> <TOOL> Press. STEREO mode Select items and press. STAMINA mode <FOLDER> <FILE> <INPUT> <REC> <TOOL> CANCEL: To return back to the top, p re s s [ M E N U ] b u t t o n 4CH mode more than 2 seconds.
Page 45 Display at the bottom of Menu screen On the menu available for recording and playback, the level of the current recorder condition is displayed at the left bottom of the screen. <PLAY MODE> <SYSTEM> <SD CARD> <USB> <MODE> On the right bottom of the screen the current folder number i s d i s p l a y e d ( O n...
Page 46: Option: Remote Control Operation
9 Option: Remote control operation When you use the optional remote controller, you can operate the H4n from a distance. Recording and placing marks. Become recording standby condition and Remote control button operation Stop reset the counter to 0 Start recording and the counter begins to Recording Standby move VOLUME ［...
Page 47: Operations
Operations...
Page 48: Setting / Recording: Set Input Source And Recording Level
1-01 Setting / Recording: Set input source and recording level Control settings for the targets, built-in microphones or external input jacks. STEREO MODE 4CH MODE Use both [MIC] and INPUT [1] [2] stereo input. Use the stereo input source of either [MIC] or INPUT [1] [2]. Built-in microphones Built-in Microphones INPUT [1] jack...
Page 49 MTR MODE On each track make the input setting of monaural or stereo. SELECT the input per track one by one and adjust. Use the REC LEVEL Press the selected track and input button. SELECT the input to 2 tracks and adjust. Press REC LEVEL and adjust the level.
Page 50: Setting / Recording: Recording In Stereo And Stamina Mode
1-02 Setting / Recording: Recording in STEREO and STAMINA mode This is a way to record in both stereo and stamina modes using the built-in or stereo microphones. [RECORDING DIRECTION] Adjust the recording Press the [MENU] button for more than 2 seconds, and start level of the input source.
Page 51 HINT: [TEMPORARY STOP] <REC FORMAT> <FILE NAME> change MARK On STEREO mode can be The file names are named When the recording format is light blinks made 19 different setting automatically. WAV, you can put the mark Press using. WAV & MP3. You can choose from two: on your file pressing [REC] I f y o u w a n t t o c h a n g e ,...
Page 52: Setting / Recording: Recording Format
1-03 Setting / Recording: Recording format <REC FORMAT> Make the setting of recording format <REC FORMAT> before the recording. NOTE: Press the [MENU] button for more than 2 seconds, and start How to use WAV and MP3 format operation from the top screen. REC FORMAT •...

Page 53: Setting / Recording: File Name
1-04 Setting / Recording: File name <FILE NAME> When recording, a file name is automatically assigned. To change that, take the following steps. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. File Name STEREO mode: STE-×××.wav (mp3) : 'STE-'3 figures, extension Press.

Page 54: Setting / Recording: Recording On 4Ch Mode
1-05 Setting / Recording: Recording on 4CH mode This is the method to record 4 channel stereo sounds coming from the built-in mic and the external input jack. [RECORDING DIRECTION] Adjust the recording level Press the [MENU] button for more than 2 seconds, and start of the input sources.
Page 55 HINT: [TEMPORARY STOP] FILE NAME <REC FORMAT> CHANGE Mark On 4CH mode the input from If you want change, operate before While the recording format is WAV, light blinks t h e b u i l t - i n a n d t h e e x t e r n a l recording.
Page 56: Setting / Recording: Recording In Mtr Mode
1-06-1 Setting / Recording: Recording in MTR mode Making proper use of tracks, you can create a recording that combines monaural and stereo. Change to <REC MODE>, <OVERWRITE/ ALWAYS NEW> [RECORDING DIRECTION] Press the [MENU] button for Change to MTR mode more than 2 seconds, and start operation from the top screen.
Page 57 About INPUT SOURCE and TRACK Only one recording track Two recording tracks 1. Input source comes from either INPUT [1] or INPUT [2]. 1. Input source comes from either INPUT [1] or INPUT [2]. INPUT [1] or [2] TRACK Track 1 or 3 INPUT [1] or [2] Track 2 or 4 The same signals are sent to both tracks.
Page 58: Setting / Recording: Recording In Mtr Mode
1-06-2 Setting / Recording: Recording <OVER WRITE> in MTR mode You can select either two recording style modes. Using the <OVERWRITE> mode, you can overwrite new sounds on the existing file. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.
Page 59: Setting / Recording: Recording In Mtr Mode
1-06-3 Setting / Recording: Recording <ALWAYS NEW> in MTR mode In ALWAYS NEW, a new file is made whenever it records. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. According to each necessity, Input setting …...
Page 60: Setting / Recording: Track Menu In Mtr Mode
1-07 Setting / Recording: TRACK MENU in MTR mode This is an exclusive menu available only on MTR mode to set a track. Link tracks together, create a stereo track, or you can create a special setting for output effects. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.
Page 61 Only on MTR MODE NOTE: NOTE: NOTE: • You cannot record on the <KARAOKE> track. Setting for <STEREO LINK>, • You can make playback operation of only a monaural file • When the <STEREO LINK> turns on automatically with a <FILE>...
Page 62: Setting / Recording: Re-Recording, Automatic
1-08-1 Setting / Recording: Re-recording, <PUNCH IN/OUT> automatic This function, <PUNCH IN/OUT>, allows you to partially re-record a recorded file. Here we explain how to start <PUNCH IN> and end <PUNCH OUT> automatically. Press the [MENU] button for Change from <REC MODE> more than 2 seconds, and start to <OVERWRITE>...
Page 63 Only on MTR MODE NOTE Setting available on MTR mode and <OVERWRITE> recording. Set the recording end position, <PUNCH OUT> Re-recording Rewind the file to the head Press the desirable position for (Counter: 0) or to the position to ‘PUNCH OUT’. start re-recording ‘PUNCH IN’.
Page 64: Setting / Recording: Re-Recording, Manual
1-08-2 Setting / Recording: Re-recording, <PUNCH IN/OUT> manual Using [OVERWRITE] recording operation in MTR mode, you can manually punch in and out. Press [REC] button during playback, from that pressed position you can start re-recording. Press the [MENU] button for Change from <REC MODE>...
Page 65 Only on MTR MODE Re-recording (Manual <PUNCH IN/OUT>) Press [FINISH RECORDING]. Performance (Not recording). light off Press [START RECORDING]. light on Press [PLAYBACK FINISH]. light on light on Performance (Recording). → ▲ ▲ RECORDING START FINISH RECORDING PLAY PLAY Start Stop Re-recording...
Page 66: Recording Function
2-01-1 Recording function <AUTO REC> The H4n can detect when the input surpasses the standard level, and can automatically start recording from the recording standby position. Pressing the [MENU] button long for two seconds, start to operate from the top screen of the MODE. HINT: Adjust the level.

Page 67: Recording Function
2-01-2 Recording function <AUTO REC STOP> When <AUTO REC> is on and recording, the H4n will automatically stop recording when the input sound volume lowers to the specified level. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 68: Recording Function
2-02 Recording function <PRE REC> The <PRE REC> setting can be initialized with pressing the [REC] button, automatically adding the previous 2 seconds to your recording. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select <ON>...

Page 69: Recording Function
2-03 Recording function <LO CUT> The <LO CUT> filter setting allows you to eliminate wind or blowing noises. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select the setting input source. Press. Select <INPUT>...

Page 70: Recording Function
2-04 Recording function <COMP/LIMIT> The <COMP / LIMIT> setting can compensate for volume differences. For each input source, low level input signals are lifted up and high level input signals are controlled down when recording. Press the [MENU] button for Select the setting input source.

Page 71: Recording Function
2-05 Recording function <REC LEVEL AUTO> This function enables to watch the input level while recording standby, and adjusts the maximum level at 6dB during recording. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. HINT: Press.

Page 72: Recording Function
2-06 Recording function <MONITOR> The sounds during standby condition are monitored through the speaker. Even when you are not in standby condition, the input sound levels can be previewed. Follow the next steps. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 73: Recording Function
2-07 Recording function <MONO MIX> Mix the selecting inputs (L/R signals), and then send the same signals to each L/R channel. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select <MONO MIX> and press. Press.

Page 74: Recording Function
2-08 Recording function <MS STEREO MATRIX> This function enables to convert the stereo microphone signals under MS system to the regular stereo L/R signals. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press.

Page 75 NOTE: <SIDE LEVEL> <SOURCE> <CH SETTING> You cannot use this function A bi-directional microphone <SIDE> and Enable to select what input is effective. Allocate <MID> inputs and <SIDE> together with <MONO MIX>. <MID> are perpendicular each other. (Only on 4CH mode) inputs between Setting value: MUTE, −48.0 _ +12.0dB L-ch (INPUT [1]) and R-ch (INPUT [2]).
Page 76: Tuner
3-01-1 Tuner <TUNER (CHROMATIC) > This is a tuner to display [NOTE] for the input signals at the chromatic mode. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Tuning. Press. The indicator shows the input signals are higher or lower than the ‘NOTE’...

Page 77: Tuner, All Other
3-01-2 Tuner, all other <TUNER> Aside from CHROMATIC, there are other tuning modes such as GUITAR, BASS, OPEN A, OPEN D, OPEN E, OPEN G and DADGAD. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Tuning.

Page 78: Tuner
3-01-3 Tuner <TUNER (CALIB) > This function allows you to make settings for calibration (Frequency of A code) or a tuner. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select <CALIB> press. Press.

Page 79: Tuner
3-01-4 Tuner <TUNER (INPUT) > Only on 4CH MODE The tuner on 4CH mode can make setting of input source tuning. HINT: Press the [MENU] button for more than 2 seconds, and start Tuning display Tuner type and code operation from the top screen. String number/ note name 〈...

Page 80: Metronome
3-02 Metronome <METRONOME> The metronome has other convenient functions such as click, pre-count, tempo, sound, etc. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. <CLICK> <PRE COUNT> S e t f o r t h e b e g i n n i n g t i m e o f t h e Set the count number just before the metronome sound.

Page 81 NOTE: The metronome starts sounding at the first point of recording—the beginning of playback. Thus, if you’re starting in the middle of a tune, sometimes the sounding point may be out of sync compared to the composition. <TEMPO> <SOUND> <PATTERN> <LEVEL>...
Page 82: All About Effect
3-03-1 All about EFFECT Brief outline about how to use <EFFECT>, its flow, input and output [Flow of the EFFECT] P.038 Change of the mode (MTR mode) #3 Import the patch <IMPORT> #1 Use <EFFECT> #2 Edit the patch <EDIT> Select the mode P.083 Use the pre-set patch as it is...
Page 83 Only on MTR MODE About input and output of [EFFECT] Effect you can use on MTR mode from monaural and stereo input. The flow of signals will change corresponding to the input sources and recording tracks. 1. Input source comes from either INPUT [1] or [2] EFFECT INPUT [1] or [2] TRACK...
Page 84: Effect
3-03-2 Effect <EFFECT> Only on MTR MODE Using the EFFECT made up of 2 modules in MTR mode, you can add various effects to the input signals. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select No.

Page 85: Effect , Patch Edit
3-03-3 Effect <EDIT>, patch edit Only on MTR MODE You can create your own patch combining <EFFECT> and adjust the PARAMETER. EDIT MENU Select the nearest image No. :PATCH NAME and press. <PRE AMP> <LEVEL> Edit of PRE AMP module Adjust PATCH level.
Page 86: Effect , Editing Pre Amp Modules
3-03-4 Effect <EDIT (PRE AMP) >, editing PRE AMP modules Only on MTR MODE You can edit the PATCH using PRE SET EFFECT. Select the nearest image PATCH and edit it..P084 ADJUST PRE AMP module ADJUST PARAMETER ICON Select <PRE AMP>and press. PRE AMP MODULE CONDITION ON 　/ 　OFF Press <ON/OFF>...
Page 87: Effect , Editing Efx Modules
3-03-5 Effect <EDIT (EFX) >, editing EFX modules Only on MTR MODE Edit the patch by selecting from various parameters that correspond closest to your desired effect. Select the nearest image PATCH and edit it..P084 ADJUST EFX module ICON Select <EFX> and press. HINT: PRE AMP MODULE CONDITION ON 　/ 　OFF...
Page 88: Effect
3-03-6 Effect <EDIT (LEVEL/RENAME) > Only on MTR MODE Adjust the levels of the patch and change the name. EFFECT 〈EDIT〉 …P.084 LEVEL RENAME Select <RENAME> and Select <LEVEL> and press. press. Change the number and Change the PATCH name press.

Page 89: Effect
3-03-7 Effect <EDIT (STORE) > Only on MTR MODE EFFECT 〈EDIT〉 …P.084 STORE Select <STORE> and press. NOTE: The items you edited have ‘ED’ display and confirmed by <STORE>operation. Select not <STORE>. Confirmed <STORE>. Select the ‘PATCH No.’ (not stored) where to save and press.

Page 90: Effect , Taking In A Patch From Another Project
3-03-8 Effect <IMPORT>, taking in a patch from another PROJECT You can apply the edited and saved EFFECT PATCH, used in other project to the current PROJECT. SELECTED EFFECT...P.083<EFFECT> <ALL> read in all patches Press <IMPORT> from Select PROJECT Select <NEXT> and press. the <EFFECT>...
Page 91 Only on MTR MODE <EACH> import one patch Select <NEXT> and press. Select <YES> and press. The patch selected at step6 is now imported to the present project. Select an import patch and press. NOTE: When pressing the <IMPORT>, “No Other Project!”...
Page 92: A Sing-Along Machine Preparation
3-04-1 A sing-along machine <KARAOKE> preparation Create spontaneous music files and convert them into KARAOKE form, then record vocals or additional guitar sounds over those files. [Flow of the KARAOKE] Press the [MENU] button for more than 2 seconds, and start operation from the top screen.
Page 93 Only on MTR MODE Continue to the next page Make CENTER CANCELATION of the KARAOKE track Change the KEY of KARAOKE track Select TRACK MENU icon Select TRACK MENU icon and press. and press. HINT: The contents of KARAOKE Select <CNT CANCEL> and press. Select <KEY>...
Page 94: A Sing-Along Machine Recording
3-04-2 A sing-along machine <KARAOKE> recording Only on MTR MODE A slight adjustment of KARAOKE TRACK KEY. Recording on KARAOKE Select TRACK MENU icon Connect the microphone. and press. Press the INPUT button corresponding to the connected input jack. Select the track menu icon and press. Select <FINE>...
Page 95: Playback : Playback Files (Stereo, 4Ch And Stamina Modes)
4-01 Playback : Playback files (stereo, 4ch and stamina modes) Immediately after recording, you can playback the file by pressing the [PLAY/PAUSE] button. If you prefer to call up the files for later playback, take the following steps. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.
Page 96: Playback :
4-02 Playback : <PLAY MODE> Aside from general playback, you can also select 1) one file only playback, 2) repeat playback of one file, and 3) all files repeat playback. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 97: Playback : Setting Marks
4-03 Playback : Setting marks While operating file playback you can create marks at desired spots. You can move easily to the spot during playback. During playback operation, How to create marks press the [REC] button. Mark A Mark B How to playback the marked file FILE You can move to the marked position...
Page 98: Playback :
4-04 Playback : <AB REPEAT> The <AB REPEAT> repeat setting allows you to playback two points on the file repeatedly. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. [START PLAYBACK] Press. Press. Select <TOOL>...

Page 99 HINT: NOTE: Caution: After setting up A and B During recording and playback, When you move around in the file using [FF] points press the [REC] button, you cannot make any settings and [REW] buttons, and whenever you press you can cancel all settings. after Step 3 of <AB REPEAT>.
Page 100: Playback :
4-05 Playback : <SPEED> Only on STEREO MODE You can adjust playback speed of the file. "Short cut" Press the [MENU] button for Pressing TRACK more than 2 seconds, and start on the top screen. operation from the top screen. Adjust playback speed.

Page 101: Playback :
4-06 Playback : <MIXER> Only on 4CH MODE You can playback 2 stereo files of 4CH mode mixing LEVEL with PAN. Press the [MENU] button for more than 2 seconds, and start operation <LEVEL> setting <PAN> setting from the top screen. Press.

Page 102: Playback : Playback Files (Mtr Mode)
4-07 Playback : Playback files (MTR mode) Only on MTR MODE There are various ways to playback on MTR mode: Create files differently according to a recording mode and allocate random files to tracks and then playback them at one time. TRACK ［...
Page 103: Playback : Appointing Time With A Counter
4-08 Playback : Appointing time with a counter Only on MTR MODE You can appoint the recording time or any time randomly using a counter which indicates time lapse of the work. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.
Page 104: Edit / Output :
5-01 Edit / Output : <FOLDER SELECT> The folder that stores the recording result and the file for the reproduction is chosen. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. Select <FOLDER> and press. "Short cut"...

Page 105: Edit / Output :
5-02 Edit / Output : <FILE SELECT> Selecting playback files from the file list. Press the [MENU] button for 長押し more than 2 seconds, and start トップ画面より operation from the top screen. Select <SELECT> and press. Press. Select <FILE> and press. "Short cut"...

Page 106: Edit / Output :
5-03 Edit / Output : <FILE INFORMATION> This function displays the selected file information. SELECTING THE FILES…P.104 <FILE SELECT> Select <INFORMATION> and press. NAME Name of the file The recorded date of the file, or the renewal date when DATE it created by PC or other device.

Page 107: Edit / Output :
5-04 Edit / Output : <FILE DELETE> Delete a selected file. SELECTING THE FILES…P.104 <FILE SELECT> Select <DELETE> and press. Select <YES> and press. a deleting file NOTE: Caution; Once deleted, you cannot retrieve the file.

Page 108: Edit / Output :
5-05 Edit / Output : <FILE DELETE ALL> Delete all the files in the folders and projects. SELECTING THE FILES…P.104 <FILE SELECT> Select <DELETE ALL> and press. Select <YES> and press. The name of the folder or the project to delete files. NOTE: Once deleted, you cannot retrieve the file.

Page 109: Edit / Output :
5-06 Edit / Output : <FILE (COPY)> Only on MTR MODE You can make file copies on MTR mode and create the copy in the same project on MTR mode. This function is convenient when you cannot make a mistake to overwrite recording or to save the copy. Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 110: Edit / Output :
5-07 Edit / Output : <FILE RENAME> On STEREO, MTR and STAMINA MODE, you can change the name of the file. # When recorded on 4CH MODE, the file names cannot be changed. SELECTING THE FILES…P.104 <FILE SELECT> [Input a letter or number.] Select <RENAME>...

Page 111 HINT: NOTE: Display when the file When converting letters, In case of two files with the name is over follow the next order: same name. The display 12 characters. shows "This file name already exists!", the screen returns When the name of the file (space)!#$%&'()+,-01234 to the previous one and you has more than 12 letters, a...
Page 112: Edit / Output :
5-08 Edit / Output : <FILE MP3 ENCODE> Only on STEREO MODE On STEREO MODE you can encode WAV FILE into MP3 FORMAT (Optional bit rate). SELECTING THE FILES…P.104 <FILE SELECT> Select <MP3 ENCODE> and press. Select <EXECUTE> and press. HINT: Select <BIT RATE>...

Page 113: Edit / Output :
5-09 Edit / Output : <FILE NORMALIZE> This function automatically adjusts up to 0dB of the file’s maximum level for enhanced sound quality and audio consistency. SELECTING THE FILES…P.104<FILE SELECT> Select <NORMALIZE> and press. Select <YES> and press. NOTE: <NORMALIZE> function is available only in case of WAV format.

Page 114: Edit / Output :
5-10 Edit / Output : <FILE STEREO ENCODE> This function makes WAV FILE on 4CH STEREO encode to STEREO FILE. The encoded files are stored in the folder on STEREO mode. SELECTING THE FILES…P.104 <FILE SELECT> You should select to make MIXER Select <STEREO ENCODE>...

Page 115 Only on 4CH MODE HINT: Select the folder on STEREO mode Select <SAVE IN> EXECUTION You cannot have two files to save the encoded files. with the same name. If the Select <EXECUTE> screen says “File name exists!”, Select <SAVE IN> and press. and press.
Page 116: Edit / Output :
5-11 Edit / Output : <MARK LIST> You can view the list of marks put in the WAV FILE. SELECTING THE FILES…P.104 <FILE SELECT> Select <MARK LIST> and press. HINT: When there are no marks on the required files, the display will show "No Mark!".

Page 117: Edit / Output
5-12 Edit / Output : <DIVIDE> Only on STEREO MODE On STEREO MODE, you can divide files at any desired position. SELECTING THE FILES…P.104 <FILE SELECT> [DIVIDE POSITION] Select <DIVIDE> and press. You should press at the desirable dividing spot. Operation of button on <DIVIDE>...
Page 118: Edit / Output :
5-13 Edit / Output : <MOVE> NOTE: This function is used to move files to a different folder or mode. MOVABLE FILE FORMAT • Only stereo files can move to SELECTING THE FILES…P.104 <FILE SELECT> stereo folder. Monaural files Select <NEXT> and press. cannot move to the stereo fold- ers.

Page 119: Edit / Output :
5-14 Edit / Output : <NEW PROJECT> Only on MTR MODE Here you can make a new project dealing with music as a unit and make settings for ‘AUDIO TRACK’ or ‘EFFECT’ in MTR mode. Press the [MENU] button for more than 2 seconds, and start HINT: operation from the top screen.

Page 120: Edit / Output :
5-15 Edit / Output : <PROJECT (SELECT) > Only on MTR MODE Import in the other projects stored in the SD card. P re s s t h e [ M E N U ] b u t t o n f o r more than 2 seconds, and start operation from the top screen.

Page 121: Edit / Output :
5-16 Edit / Output : <PROJECT (DELETE) > Only on MTR MODE This function is to delete project. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select a project to be Press. deleted and press.

Page 122: Edit / Output :
5-17 Edit / Output : <PROJECT (RENAME) > Only on MTR MODE You can change the name of the project. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select the letter to change and press. Press.

Page 123: Edit / Output :
5-18 Edit / Output : <PROJECT (COPY) > Only on MTR MODE Copy the project and create a new project with a new number. Select a target project and start operation.…P.119 Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 124: Edit / Output :
5-19 Edit / Output : <PROJECT (BOUNCE) > You can make one file in MONO or STEREO, collecting the mixed of MTR mode results recently created. Select a target project and start operation.…P.119 Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 125 Only on MTR MODE Select the type capable to output Execution HINT: Select <FORMAT> and press. Select <EXECUTE> and press. B O U N C E m e a n s t o p u t together the various music data divided in different tracks and files into the stereo or monaural files.
Page 126: Edit / Output :
5-20 Edit / Output : <PROJECT (PROTECT) > Only on MTR MODE Using the PROTECT function on your project prohibits dividing of tracks and the change of files in that project. Select a target project and start operation.…P.119 Press the [MENU] button for more than 2 seconds, and start operation from the top screen.

Page 127: Utility :
6-01 Utility : <DISPLAY BACK LIGHT> You can set the lighting time of the LCD BACK LIGHT on the display. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select the time you desire and press. Press.

Page 128: Utility :
6-02 Utility : <DISPLAY CONTRAST> Adjust the display contrast. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Change the number Press. and press. Select <SYSTEM> and press. * You can adjust from #1 to #8. A higher the number corresponds to more contrast.

Page 129: Utility :
6-03 Utility : <BATTERY TYPE> By setting your battery type, H4n can correctly display the remaining lifetime of the battery. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select the battery type and Press.

Page 130: Utility :
6-04 Utility : <VERSION> After it starts, the version of H4n can be confirmed. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. Select <SYSTEM> and press. Select <VERSION> and press. NOTE: system version You cannot use this setting during recording and playback.

Page 131: Utility :
6-05 Utility : <FACTORY RESET> Return all the setting back to the original shipment condition. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Select <YES> and press. Press. Select <SYSTEM> and press. Select <FACTORY RESET>...

Page 132: Utility :
6-06 Utility : <REMAIN> You can confirm the remaining capacity of the SD CARD. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. Select <SD CARD> and press. Select <REMAIN> and press. NOTE: approximate remaining capacity...

Page 133: Utility :
6-07 Utility : <FORMAT> Formatting the SD card suitable the H4n. Press the [MENU] button for more than 2 seconds, and start operation from the top screen. Press. Select <YES> and press. Select <SD CARD> and press. HINT: “Format Card” If you insert the SD card not for the H4n, the unit says at booting up time,“Format Card?”...

Page 134: Utility :
* PC = computer (Windows and Macintosh) system Open Web site of ZOOM on PC and download the most recent system software. [http://www.zoom.co.jp] To set-up connection of H4n and PC, connect with USB cable. Connect H4n to PC with...

Page 135: Utility: How To Use H2 And H4 Sd Cards
6-09 Utility: How to use H2 and H4 SD cards When you use the SD cards for H2 and H4 in the H4n, you can move their files and projects to the H4n. Insert SD card for H2/H4 unit into H4n and NOTE: boot up the unit.
Page 137: Reference
Reference...
Page 138: Main Spec List By Mode
Main spec list by mode STEREO MODE STAMINA STEREO WAV: 44.1/48/96kHz 16/24bit 44.1kHz 16it STEREO WAV, STEREO MP3: STEREO WAV × 2： MONAURAL WAV, 44.1 kHz/16bit WAV type only Recording Format 48, 56, 64,80,96,112,128,160,192, 44.1/48kHz 16/24bit those total 4 tracks can be (fixed) 224,256, combined...
Page 139: Available Setting Menu List By Each Mode
Available setting menu list by each mode SYSTEM INPUT SETTING PROJECT STEREO STAMINA STEREO STAMINA STEREO STAMINA DATE/TIME LO CUT NEW PROJECT − − − − BACK LIGHT COMP/LIMIT SELECT − − − − − LCD CONTRAST MONITOR RENAME − −...
Page 140: Effect Types On Mtr Mode And The Parameter
Combination of Fender Combo amp and Ibanez TS-9 registered trademarks of their respective owners. The names are used only to illustrate sonic characteristics and do not indicate any affiliation with ZOOM CORPORATION. SD+MSstk Combination of Marshall stack amp and Boss SD-1...
Page 141 ZOOM. • Manufacturer names and product names mentioned in this table are trademarks or registered trademarks of their respective owners. The names are used only to illustrate sonic characteristics and do not indicate any affiliation with ZOOM CORPORATION.
Page 142: Efx Module
Effect types on MTR mode and the parameter ■ EFX module ● Compressor/limiter effect types ● Modulation effect types This is a compressor which attenuates high-level signals This is an auto wah effect that tracks the input signal RackComp AUTO WAH and boosts lowlevel signals.
Page 143 This effect produces a metallic ringing sound. Adjusting the This effect produces a resonating and strongly undulating RING MOD FLANGER FREQUENCY drastic change of sound character. sound. Selects the insertion position of the EFX module: (1) DEPTH 0 − 100 Adjusts the modulation depth.
Page 144 Effect types on MTR mode and the parameter ● Delay/reverb effect types This effect lends spatial depth to the sound by reproduc- This effect varies the sound like a talking modulator. ing the ambient atmosphere of a room. Adjusts the frequency range in which the effect (1) SIZE 1 −...
Page 145 This is a reverse delay with a long delay time of up to RvsDelay [Table] 2500 milliseconds. Parameters with a < > symbol can be selected in note units, using 1 − 2500ms,* (1) TIME Adjusts the delay time. the metronome tempo as reference. Note durations Ref.
Page 146: H4N Patch List
H4n patch list Effect patches in this page" Patch List" can be used in 4track mode and audio interface func- tion. (with sampling rate in 44.1kHz ) PREAMP Category Patch Name Description module module Fender Clean Basic clean sound optimized for recording. FD CLEAN Guitar Natural Cho...
Page 147 * Manufacturer names and product names mentioned in this patch list are trademarks or registered trademarks of their respective owners and do not indicate any affiliation with ZOOM CORPORATION. All product and artist names are intended only to illustrate sonic characteristics that were used as reference in the development of this product.
Page 148: H4N Products Spec
USB functions can be operated by USB bus power A/D conversion 24 bit 24 bit × 128 oversampling DC 5 V 1A AC from AC adapter ( ZOOM AD-14 ） , Power D/A conversion 24 bit 24 bit × 128 oversampling...
Page 149: When You Think Something May Be Wrong With Your Machine
When you think something may be wrong with your machine If there are problems during operation of the H4n, check the following points first. • Verify that an SD card is inserted in the slot. Problems during recording/playback • Check whether the hold function is enabled ( ➝ P.020). •...
Page 150: Index
Index [4CH MODE] EDIT (STORE) Effect types and parameters P139 P37·39 Details Copyright warnings Effects Mode and top screen CANCEL operation IMPORT P37·38 P145 Mode selection CARIB/TUNER Patch List Playback operation CHROMATIC/TUNER EFX module/EFFECT Recording operation COMP/LIMIT Connections P130 FACTORY RESET [FILE] AB repeat FILE (COPY)
Page 151 [MENU] button operations On-mic recording METRONOME Over write recording mode P100 IMPORT/EFFECT MIXER INPUT [MIC][1][2] buttons operations Mixing P37−44 INPUT/TUNER MODE MONITOR PATCH EDIT/EFFECT P145 MONO MIX Patch List P117 MOVE PAN/TRACK MENU P111 [KARAOKE] MP3 ENCODE Phantom power 　Preparation MP3 file format PLAY MODE 　Recording...
Page 152 Index [STAMINA MODE] Details P37,39 [USB connection] REC FORMAT Mode and top screen P17·38 REC LEVEL AUTO Mode setting H4n used as a SD card reader REC LEVEL operations Playback operation H4n used as an Audio Interface [REC] button operations Recording operation USB bus power P113...
Page 153 The FCC regulation warning (for U.S.A.) This equipment has been tested and found to comply with the limits harmful interference to radio communications. However, there is no for a Class B digital device, pursuant to Part 15 of the FCC Rules. guarantee that interference will not occur in a particular installation.
Page 154 ITOHPIA Iwamotocho 2chome Bldg. 2F, 2-11-2, Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032, Japan Web Site: http://www.zoom.co.jp H4n-5000-1...
Page 155 4" icon shown on the desktop. To bring up the "Sound" window, select "Control Panel" from the The ZOOM H4 ASIO driver software is required to enable use of Start menu and click "Hardware and Sound", then click "Sound". Cubase LE 4 for audio input and output with a computer. Refer to the Install Cubase LE 4 on the Macintosh.
Page 156 MacOS X Cubase LE 4 installation Connections and preparation Use Cubase LE 4 to record Windows Vista / XP Continued from front From the "Devices" menu of Cubase LE 4, select "VST HINT Check the recorded content. Connections" and select the device containing the When the monitoring button is enabled, the level meter next to the string "Zm In (Out)"...

Zoom H4next Operation Manual

Getting Started

Operations

Reference

Quick Links

Related Manuals for Zoom H4next

Summary of Contents for Zoom H4next

Table of Contents