Download Print this page
Zoom H4n Pro Operating Instructions Manual

Zoom H4n Pro Operating Instructions Manual

Digital shot detection system (dsds)
Hide thumbs Also See for H4n Pro:

Advertisement

Quick Links

Digital Shot Detection
System (DSDS)
H4n Pro Digital Recorder
TC-410-3500-000
MAN-TC-410-000 (R06)
12001 Cr 1000
Godley, Texas, 76044, USA
Phone: +1 (817) 551-0540
Fax: +1 (817) 551-1674
www.corelab.com/owen
Warning: use of owen equipment contrary to manufacturer's specifications or operating instructions may result in property damage, serious injury or
fatality. If you are not trained in the handling and use of explosive devices, do not attempt to use or assemble any owen perforating systems or owen
firing devices.
This technology is regulated by and, if exported, was exported from the united states in accordance with the export administration regulations (EAR).
Diversion contrary to U.S. Law is prohibited. Export and/or re-export of this technology may require issuance of a license by the bureau of industry and
security (BIS), U.S. Department of Commerce. Consult the BIS, the EAR, and/or Owen Compliance Services, Inc. To determine licensing requirements
for export or re-export of this technology.
This document contains confidential information of Owen Oil Tools LP (Owen) and is furnished to the customer for information purposes only. This
document must not be reproduced in any way whatsoever, in part or in whole, or distributed outside the customer organization, without first obtaining
the express written authorization of owen. This document is the property of owen and returnable upon request of Owen.
©2011, 2018 Owen Oil Tools
All rights reserved
MAN-TC-410-000.indd 1
6/11/18 3:25 PM

Advertisement

loading
Need help?

Need help?

Do you have a question about the H4n Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Zoom H4n Pro

  • Page 1 Digital Shot Detection System (DSDS) H4n Pro Digital Recorder TC-410-3500-000 MAN-TC-410-000 (R06) 12001 Cr 1000 Godley, Texas, 76044, USA Phone: +1 (817) 551-0540 Fax: +1 (817) 551-1674 www.corelab.com/owen Warning: use of owen equipment contrary to manufacturer’s specifications or operating instructions may result in property damage, serious injury or fatality.
  • Page 2 The data is stored using a portable recorder. The signal can be monitored and recorded simultaneously. The recorded signal can also be digitally stored. SPECIFICATIONS: H4N PRO DIGITAL RECORDER Recording Technology 4 Track or Stereo...
  • Page 3 Carrying Case, DSDS System (not shown) TCP-DSDS-021 Headphones, AKG K72 TC-410-0002-055 H4n Pro Digital Recorder Included W / H4n Pro Download License for Cubase LE and WaveLab LE Software Included W / H4n Pro AA Battery Included W / H4n Pro...
  • Page 4 Digital Shot Detection System (DSDS) MAN-TC-410-000 (R06) ©2011, 2018 Owen Oil Tools All rights reserved MAN-TC-410-000.indd 4 6/11/18 3:25 PM...
  • Page 5 The Owen DSDS unit is simple to operate and easy to use. The recorder has been preset to operate at the well site “out of the box” with a few preliminary actions. Familiarize yourself with the H4n Pro Recorder Operating Manual and the pre-operation checks provided in this Manual.
  • Page 6 Digital Shot Detection System (DSDS) Connect the SD Card 1.2.1 Ensure power is off 1.2.2 Rotate the lid away from the Recorder to open 1.2.3 Insert the SD card into the slot 1.2.4 Rotate the lid closed Function Check 1.3.1 Turn on the Recorder to check that it is operating properly. Move the On/Off switch DOWNWARD to turn on the Recorder.
  • Page 7 Digital Shot Detection System (DSDS) Connect ther Recorder to the MIC: Note: For the DSDS System operation it is not necessary for the MIC Power Unit to have a Battery installed. 1.4.1 Insert the female end of the 25’ MIC Cable (lettering facing up) into the MIC Power Unit.
  • Page 8 Digital Shot Detection System (DSDS) Connect Headphones and Microphone to Recorder 1.5.1 Insert the male connector of the Headphones into the ‘Phones’ jack on the Recorder. 1.5.2 Insert the other end of the 25’ MIC cable into the right hand jack (Input 2) on the botton of the Recorder.
  • Page 9 1.6.6 Immediately after recording, the file can be played back by pressing the PLAY/ PAUSE button. Create a CD Job Record 1.7.1 Refer to the H4n Pro Recorder Owner’s Manual to create a Job Record by transferring data onto a CD. MAN-TC-410-000 (R06) ©2011, 2018 Owen Oil Tools All rights reserved...

This manual is also suitable for:

Tc-410-3500-000