Extron electronics MLC 104 IP Plus Series User Manual page 101

Command/Response Table for SIS Commands (continued)
Command ASCII (Telnet)
(host to MLC)
File streaming commands
File streaming commands should be used by advanced programmers only.
NOTE:
Load a file to user flash memory via Telnet or RS-232
E
or
Load file to user flash memory via Telnet or RS-232 and set specific time and date for the uploaded file
E
•
NOTES: • If the MLC has insufficient memory available to store the sent file, it responds with Fld
• Firmware can be updated by using these commands to upload an ____.s19 file to the MLC. If the MLC determines that the file is not intended for its model,
]
the Upl response is followed by a Fwm
Retrieve a file from user flash memory via Telnet or RS-232
E
Load a file to user flash memory via port 80 (HTTP, web)
Send a Post command on port 80 followed by the delimited data to be written to the file in flash memory.
Retrieve a file from user flash memory via port 80 (HTTP, web)
Send a Page Get command on port 80 followed by WSF
Example:
http://192.168.254.254/mypage.html?cmd=WSF
Web browser-specific commands
Read response from last URL E
command
URL Encoded (web)
(host to MLC)
24, 28
}
+ UF filesize, filename {raw, unprocessed data in a file of up to filesize}
•
+ UF filesize*<day-of-week> <month>
}
<second>, filename {raw, unprocessed data in a file of up to filesize}
]
(firmware mismatch) response.
28
}
filename SF
|
W filename SF
} |
UB WUB
Response
(MLC to host)
]
Upl
24, 28
• • • •
<day> <year> <hour> <minute>
]
Upl
]
(failed) instead of with Upl
{4 bytes of filesize, and then raw data from the file}
|
{The response is raw data from the file.}
|
{data from the file mypage.html.}
]
{response from command}
Additional Description
<day-of-week> = 1-7 where 1 = Sunday.
<month> = 1-12 where 1 = January.
.
<day> = 1-31
<hour> = 0-23.
]
(uploaded).