Extron electronics MLC 104 IP Plus Series User Manual page 119

e. Click Video Mute.
f.
Click Off.
g. Click the green arrow adjacent to the Release area or drag the command to the
Release area.
h. For Toggle, click 2 to associate the Video Mute Off command with the second
button release.
7. If desired, configure the button lights.
a. In the Button Operations panel, click the Light Control tab.
b. Click on the desired button light setting, a combination of color and action
(nonblinking, slowly blinking, fast blinking).
c.
Click the green arrow adjacent to the Release area.
d. With the name of the light setting selected in the Release area, for Toggle, click
1 to associate that button lighting setting with the first button release.
e. Repeat steps 7b and 7c to select a button light setting for the second button
release.
f. Click on the newly added button lighting command in the Release area.
g. Click Toggle 2.
TIP: Basic button setup is covered in the front panel tab section of the
Global Configurator Help file, in case you want to review those steps during
configuration.
MLC 104 IP Plus Series • Special Applications 111