Extron electronics MLC 104 IP Plus Series User Manual page 139

7. Under Digital Output #1, click Pulse (see image below).
8. Select a Pulse Time (duration) of 2.00 seconds.
9. Click the green arrow ( ) adjacent to the Press area or drag the Pulse command to
the Press area.
10. Click the MLC Display Off button.
11.
Type in text for the onscreen button label and, if desired, the tool tip (see image below).
12. In the Button Operations panel, under the Digital Output tab, locate Digital
Output #2 and click Off. This command ensures that the relay is open (off) before it
is pulsed.
13. Click the green arrow ( ) adjacent to the Press area or drag the command to the Press
area.
MLC 104 IP Plus Series • Special Applications 131