Information on the use of instructions
1
Information on the use of instructions
Before reading this part of the Manual, you must read and understand the general
part (Part A) of the Manual provided with the Radio Remote Control.
1.1
Structure of the Instruction Manual
The Manual for the use and maintenance of Autec Dynamic+ series Radio Remote Controls
consists of different parts, that altogether form the Manual; the Manual must be read carefully,
understood and applied by the Radio Remote Control's Owner, User and by all those Persons
that, for any reasons, may operate with the Radio Remote Control or with the Machine where
it is installed.
The following table describes the structure of the Instruction Manual for the use and the
maintenance of the Radio Remote Control.
Part
Title
A
General part
Conformity and
B
frequencies
C
Transmitting Unit
D
Receiving Unit
Battery and
E
Battery Charger
AUTEC - Dynamic+ series
- General information regarding the series,
- directions for risk assessment of the "Machine+Radio Remote
Control" system,
- warnings for installation of the Radio Remote Control,
- warnings for use and maintenance of the Radio Remote Control,
- instructions for correct transportation and storage of Radio Remote
Control.
- Operating frequency bands of the Radio Remote Control,
- conformity and law references of the Radio Remote Control.
Description and instructions concerning the Transmitting Unit,
including:
- description of operation,
- commands,
- light signals,
- malfunctions,
- additional instructions to the general part.
Description and instructions concerning the Receiving Unit,
including:
- description of operation,
- light signals,
- malfunctions,
- additional instructions to the general part.
Description, warnings and instructions concerning batteries and
Battery Chargers, including:
- description of operation,
- light signals,
- malfunctions,
- instructions for the User.
Contents
LIUDJS001_eng-01
7
Need help?
Do you have a question about the Dynamic+ Series and is the answer not in the manual?