AUTEC DYNAMIC+P Series Instruction Manual For The Use And The Maintenance
Hide thumbs
Also See for DYNAMIC+P Series:
Related Manuals for AUTEC DYNAMIC+P Series
Summary of Contents for AUTEC DYNAMIC+P Series
- Page 1 LIUPJMV03_eng-00 Instruction Manual for the use and the maintenance of the Radio Remote Control Original instructions Part C: PJM Transmitting Unit with video option DYNAMIC+P SERIES...
- Page 3 ACCORDINGLY, IT IS THE RESPONSIBILITY OF THE MACHINE MANUFACTURER ON WHICH THE AUTEC RADIO REMOTE CONTROL IS INTENDED TO BE INSTALLED, to perform an in-depth and accurate risk assessment to determine if the Autec Radio Remote Control is suitable for operating a Machine in conditions of safety and operational...
- Page 4 It is also the responsibility of the Manufacturer and of the design professionals of the Machine on which the Autec Radio Remote Control is to be installed and used to be certain that the structure, condition, organization and markings of the Machine as installed at the facility is appropriate for and will allow for the safe and reliable use and control of the Machine through the Autec Radio Remote Control interface.
- Page 5 Machine operated by or through the Autec Radio Remote Control are fully and properly educated and trained by qualified Personnel in the proper and safe use of the Autec Radio Remote Control and of the Machine, including without limitation complete familiarity...
-
Page 6: Table Of Contents
8.14 Switching off the Transmitting Unit ..............30 8.15 Cable control ....................30 8.16 BACK-UP UNIT ....................32 Instructions for the User ..................32 9.1 Usage restrictions ..................... 33 9.2 User behaviour ....................33 Belt or harness ....................35 10 Maintenance ......................39 LIUPJMV03_eng-00 AUTEC... - Page 7 11 Malfunction signalled by the Transmitting Unit ............. 40 11.1 Red LED and green LED ................... 40 11.2 Identifying the activated command ..............42 12 Decommissioning and disposal ................43 AUTEC LIUPJMV03_eng-00...
-
Page 8: Information On The Use Of Instructions
(Part A) of the Manual provided with the Radio Remote Control. Structure of the Instruction Manual The Manual for the use and maintenance of Autec Radio Remote Controls consists of different parts, that altogether form the Manual; the Manual must be read carefully, understood and applied by the Radio Remote Control's Owner, User and by all those Persons that, for any reasons, may operate with the Radio Remote Control or with the Machine where it is installed. - Page 9 Receiving Unit. Usage and maintenance instruction as a whole are to be considered as an integral part both of the Autec Radio Remote Control and of the Machine, system, device or Machinery system where the Radio Remote Control is installed.
-
Page 10: Caption And Terminology
Caption and terminology Contact Autec if any of the instructions, symbols, warnings or images are not clear and understandable, or if you have doubts or questions. In this part of the Manual, the terms listed below have the same meaning explained in the... -
Page 11: Symbols
Regulation for the storage of instructions are described in the paragraph with the same title in the general part: please refer to that part. Intellectual property Restrictions connected to intellectual property are described in the paragraph with the same title in the general part: please refer to that part. AUTEC LIUPJMV03_eng-00... -
Page 12: Brief Product Presentation
Brief product presentation Series, Radio Remote Control and Unit The object of this part of the Manual is the PJM (Model J9P) Transmitting Unit of an Autec Dynamic+P series' Radio Remote Control. Autec Dynamic+P series' Radio Remote Controls are designed to be used on Machines and provide a command interface to their command and control system, to be used from an appropriate distance and position. -
Page 13: Description
Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. AUTEC Srl Via Pomaroli, 65 - 36030 Caldogno (VI) - Italy TA1441-01... -
Page 14: Transmitting Unit
Transmitting Unit through the access point. The instructions and warnings for the cameras, the PAU and the access point are to be found in the corresponding manuals that come with the single devices. LIUPJMV03_eng-00 AUTEC... - Page 15 The Machine Manufacturer, the Installer, the Owner, the User and/or the Maintenance Technician, must make sure that the interruption of the Wi-Fi connection between the access point and the Transmitting Unit can never lead to a hazardous situation in the specific working application. AUTEC LIUPJMV03_eng-00...
-
Page 16: Technical Data
Antenna integrated Housing material PA 6 (20%fg) Protection degree IP65 (NEMA 4) Dimensions 310x220x220mm (12.2x8.7x8.7in) Weight 2.5kg (5.5lb) Run time at 20°C (68°F) 5.5h Power frequency magnetic field immunity up to 300A/m according to CEI EN 61000-4-8 LIUPJMV03_eng-00 AUTEC... -
Page 17: Technical Data Sheet
Manufacturing year, a QR code Transmitting Unit identification Battery housing and the Transmitting Unit plate identification number (TU ID) Model, Type and main Transmitting Unit technical data, Technical data plate Battery housing marking and possible Radio Remote Control marks AUTEC LIUPJMV03_eng-00... -
Page 18: Light And Acoustic Warning Signals
Manufacturer depending on the Machine's functions for which he wants to receive information. Signals provided by the red LED [A] indicate a Radio Remote Control malfunction. The meaning of such signals and possible actions to perform are described in chapter 11. LIUPJMV03_eng-00 AUTEC... -
Page 19: Acoustic Signals
The acoustic signal device activates whenever the red LED [A] illuminates. The meaning of the red LED [A] lighting up and of the activation of the acoustic signal and possible actions to perform are described in chapter 11. The meaning of the acoustic signals cannot be modified. AUTEC LIUPJMV03_eng-00... -
Page 20: General Operating Instructions
2. Pull the mechanical key to remove it from its receptacle. 8.1.2 M-Key The M-Key makes it possible power the Transmitting Unit. Inserting the M-Key Push the M-Key to the bottom of its housing. Removing the M-Key Remove the M-Key from its housing by pulling the lanyard. LIUPJMV03_eng-00 AUTEC... -
Page 21: Start Pushbutton
Machine immediately whenever a dangerous condition occurs. The Machine Manufacturer and/or the Installer must provide the User with the instructions and warnings concerning possible risks that may originate from the Machine stop (by way of example: movement inertia, swinging load…). AUTEC LIUPJMV03_eng-00... -
Page 22: Ems Pushbutton
Functions performed by the pushbuttons [E] are configurable and are decided by the Machine Manufacturer: the User must be properly trained in this respect. No operation or movement of the Machine shall be connected to the use of the pushbuttons [E]. LIUPJMV03_eng-00 AUTEC...
Need help?
Do you have a question about the DYNAMIC+P Series and is the answer not in the manual?
Questions and answers