AUTEC AIR SERIES Instruction Manual For The Use And The Maintenance
Radio remote control
Hide thumbs
Also See for AIR SERIES:
- Instruction manual (52 pages) ,
- Instruction manual for the use and the maintenance (44 pages) ,
- Original instructions manual (28 pages)
Related Manuals for AUTEC AIR SERIES
Summary of Contents for AUTEC AIR SERIES
- Page 1 LIUACF004-00_eng Instruction Manual for the use and the maintenance of the Radio Remote Control Original instructions Part B: Conformity and frequencies (434MHz and 915MHz) AIR SERIES...
- Page 3 Autec Radio Remote Control and all of its components are done solely and completely in accordance with this Manual, and with all local applicable laws, safety rules and standards (all of the foregoing referred to herein as “Laws,...
- Page 4 It is also the responsibility of the Manufacturer and of the design professionals of the Machine on which the Autec Radio Remote Control is to be installed and used to be certain that the structure, condition, organization and markings of the Machine as installed at the facility is appropriate for and will allow for the safe and reliable use and control of the Machine through the Autec Radio Remote Control interface.
- Page 5 Laws, Regulations and Standards, even local, and that such Users and other Persons do in fact at all times operate or work with the Autec Radio Remote Control safely and ONLY in compliance with Autec instructions and warnings and with all applicable Laws, Regulations and Standards, even local.
-
Page 6: Table Of Contents
Contacts and useful addresses ..............11 Warranty ..................... 11 Technical assistance and spare parts ............11 Conformity ......................12 EC conformity ....................12 FCC/IC conformity ..................12 Frequencies ......................15 Frequency band 433.050-434.790MHz ............16 Frequency band 915-928MHz ..............16 LIUACF004-00_eng AUTEC... -
Page 7: Information On The Use Of Instructions
(Part A) of the Manual provided with the Radio Remote Control. Structure of the Instruction Manual The Manual for the use and maintenance of Autec Air series Radio Remote Controls consists of different parts, that altogether form the Manual; the Manual must be read carefully, understood and applied by the Radio Remote Control's Owner, User and by all those Persons that, for any reasons, may operate with the Radio Remote Control or with the Machine where it is installed. - Page 8 Receiving Unit. Usage and maintenance instruction as a whole are to be considered as an integral part both of the Autec Radio Remote Control and of the Machine, system, device or Machinery system where the Radio Remote Control is installed.
-
Page 9: Caption And Terminology
Information on the use of instructions Caption and terminology Contact Autec if any of the instructions, symbols, warnings or images are not clear and understandable, or if you have doubts or questions. In this part of the Manual, the terms listed below have the same meaning explained in the... -
Page 10: To Whom The Instructions Are Addressed
Regulation for the storage of instructions are described in the paragraph with the same title in the general part: please refer to that part. Intellectual property Restrictions connected to intellectual property are described in the paragraph with the same title in the general part: please refer to that part. LIUACF004-00_eng AUTEC - Air series... -
Page 11: Brief Product Presentation
- the different frequency bands, in which the Radio Remote Control is able to operate. Autec Air series' Radio Remote Controls are designed to be used on Machines and provide a command interface to their command and control system, to be used from an appropriate distance and position. -
Page 12: Conformity
- not modify the Radio Remote Control conformity, by performing modifications or technical operations that change its operation. During training on or usage of Autec Radio Remote Controls, local provisions imposing the conservation of product conformity with local standards must be respected, as well as specific standards related to safety in the use of Radio Remote Controls or electrical devices, both in the working environment or outside of it. - Page 13 DCRS13 OQA-RGMKA00M 9061A-RGMKA00M Model RGM Type KA00M Receiving Unit L a b c ACRS13-L OQA-RLBHA00M 9061A-RLBCA00M Model RLB Type HA00M Receiving Unit M a b c ACRM15 OQA-RMCEA00M 9061A-RMCEA00M Model RMC Type EA00M AUTEC - Air series LIUACF004-00_eng...
- Page 14 Autec stylus λ/4 <0dBi 50 Ohm Autec allows you to use only the dedicated antenna supplied either with the remote control or as original spare part. The use of any other type of antenna is prohibited and will invalidate the warranty.
-
Page 15: Frequencies
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Frequencies Air series' Radio remote controls can work at two different frequency bands: 433.050- 434.790MHz or 915.000-928.000MHz. The Radio Remote Controls' working frequency is defined by market-specific laws and standards. -
Page 16: Frequency Band 433.050-434.790Mhz
4.2.1 Frequencies The radio link between the Units of Autec Air series Radio remote controls is established at one of the frequencies permitted by the USA, Canadian and Australian standards in force when the system is put on the market. - Page 20 Via Pomaroli, 65 - 36030 Caldogno (VI), ITALY PH: +39 0444 901000 - Fax: +39 0444 901011 info@autecsafety.com - www.autecsafety.com MADE IN ITALY...