Brief Product Presentation; Series, Radio Remote Control And Unit; Conformity With Standards; Contacts And Useful Addresses - AUTEC Dynamic+ Series Instruction Manual

Brief product presentation

2 Brief product presentation
2.1

Series, Radio Remote Control and Unit

The object of this part of the Manual is the DJS Transmitting Unit of a Dynamic+ series'
Autec Radio Remote Control.
Autec Dynamic+ series' Radio Remote Controls are designed to be used on Machines and
provide a command interface to their command and control system, to be used from an
appropriate distance and position.
2.2

Conformity with standards

The conformity of Radio Remote Controls with standards and with working requirements and
conditions in the single Countries is provided in the related specific part "Conformity and
frequencies" (Part B) of the Manual.
2.3

Contacts and useful addresses

The Radio Remote Controls are produced by Autec srl – Via Pomaroli, 65 – 36030 Caldogno
(VI) – ITALY.
You can find contacts for Autec, its distributors, dealers and authorized service centres on
the website www.autecsafety.com.
2.4

Warranty

General warranty conditions are indicated both in the relevant sheet provided together with
this documentation, and in the specific page on the website www.autecsafety.com.
2.5

Technical assistance and spare parts

If you need technical services and/or spare parts, please refer to contacts provided in the
website www.autecsafety.com.
When applying for technical service to Autec, its distributors, dealers and authorized service
centres, the Radio Remote Control's serial number is required; you can find it on the
identification plate on the Transmitting Unit and/or on the Receiving Unit.
AUTEC - Dynamic+ series
11
LIUDJS001_eng-01