Hw-Module Profile Qos Ingress-Model Peering - Cisco NCS 540 Series Routers Command Reference Manual

hw-module profile qos ingress-model peering

hw-module profile qos ingress-model peering

To enable the peering QoS profile feature, use the hw-module profile qos ingress-model peering command
in the XR Config mode. To disable this feature, use the no form of this command.
hw-module profile qos ingress-model peering [locationnode-id]
Syntax Description
location node-id
The peering QoS profile feature is disabled by default, unless enabled by this command.
Command Default
XR Config mode
Command Modes
Command History
Release
Release
6.2.1
The router must be reloaded for the hw-module command to be functional.
Usage Guidelines
Task ID
Task
ID
qos
The following example shows how to enable the peering QoS profile feature.
RP/0/RP0/CPU0:router#config
RP/0/RP0/CPU0:router(config)#hw-module profile qos ingress-model peering
RP/0/RP0/CPU0:router(config)#commit
RP/0/RP0/CPU0:router# reload
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
8
Indicates the designated node. The node-id argument is entered in the rack/slot/module
notation.
Modification
This command was introduced.
Operation
read,
write
QoS Classification Commands