End-Class-Map - Cisco NCS 540 Series Routers Command Reference Manual

end-class-map

end-class-map

To end the configuration of match criteria for the class and to exit class map configuration mode, use the
end-class-map command in class map configuration mode.
end-class-map
This command has no keywords or arguments.
Syntax Description
No default behavior or values
Command Default
Class map configuration
Command Modes
Command History
Release
Release 6.0
No specific guidelines impact the use of this command.
Usage Guidelines
Task ID
Task
ID
qos
Examples
This example shows how to end the class map configuration and exit class map configuration mode:
RP/0/RP0/CPU0:router(config)# class-map class1
RP/0/RP0/CPU0:router(config-cmap)# match access-group ipv4 1
RP/0/RP0/CPU0:router(config-cmap)# end-class-map
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
6
Modification
This command was introduced.
Operations
read,
write
QoS Classification Commands