Cisco NCS 540 Series Routers Command Reference Manual page 52

Congestion Management Commands
policy-map
Examples
These examples show how to create a policy map called policy1 and configures two class policies
included in that policy map. The policy map is defined to contain policy specification for class1 and
the default class (called class-default) to which packets that do not satisfy configured match criteria
are directed. Class1 specifies policy for traffic that matches access control list 136.
RP/0/RP0/CPU0:router(config)# class-map class1
RP/0/RP0/CPU0:router(config-cmap)# match access-group ipv4 136
RP/0/RP0/CPU0:router(config)# policy-map policy1
RP/0/RP0/CPU0:router(config-pmap)# class class1
RP/0/RP0/CPU0:router(config-pmap-c)# set precedence 3
RP/0/RP0/CPU0:router(config-pmap-c)# exit
RP/0/RP0/CPU0:router(config-pmap)# class class-default
RP/0/RP0/CPU0:router(config-pmap-c)# queue-limit 1000000 bytes
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
46