QoS Classification Commands
end-policy-map
To end the configuration of a policy map and to exit policy map configuration mode, use the end-policy-map
command in policy map configuration mode.
end-policy-map
This command has no keywords or arguments.
Syntax Description
No default behavior or values
Command Default
Policy map configuration
Command Modes
Command History
Release
Release 6.0
No specific guidelines impact the use of this command.
Usage Guidelines
Task ID
Task
ID
qos
Examples
This example shows how to end the policy map configuration and exit policy map configuration
mode.
RP/0/RP0/CPU0:router(config)# policy-map policy1
RP/0/RP0/CPU0:router(config-pmap)# class class1
RP/0/RP0/CPU0:router(config-pmap-c)# police rate 250
RP/0/RP0/CPU0:router(config-pmap)# end-policy-map
Operations
read,
write
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
end-policy-map
Modification
This command was introduced.
7