Table of Contents
Advertisement
Samsung DCS
Voice Dialler
Voice Dialler allows you to record a voice pattern in a digital format
and store it in an addressable location. When the Voice Dialler fea-
ture is activated, it will identify, retrieve and process the associated
stored data. This latest technology has been applied to the area of
personal speed dialling. It allows the calling party to speak a name
into the handset and have the system place a call.
Note: The Voice Dialler feature requires the optional VDIAL card and is not avail-
able on 816 or 408/408i systems.
To use Voice Dialler:
• • • • You must be assigned to a channel of the
tem administrator should do this.
• • • • Change your extension's passcode (see Change Your Passcode in
Customising Your Keyset).
• • • • Assign personal speed dial numbers (see Programming Personal
Speed Dial Numbers, above).
Recording a Voice Dialler Name
1. Lift the handset.
2. Press the
VREC
3. Enter your extension's passcode.
4. Enter the personal speed dial bin number, e.g. 05.
5. After the short tone burst, speak the name carefully into the hand-
set.
Note: Say the name as one word (e.g., Johnsmith for John Smith). Avoid similar
names such as Ted, Ned and Fred.
If you are successful, you will hear a short tone burst confirming the
name is recorded. If you hear error tone, record the name again fol-
lowing the same procedure.
key, if assigned, or dial 682.
– 32 –
Keyset User Guide
card. Your sys-
VDIAL
Advertisement
Table of Contents
