Busy Extension Camp-On; Calling Your System Operator - Samsung DCS KEYSET User Manual

Samsung DCS

Busy Extension Camp-On

When you call another extension and receive a busy signal but you do
not want to wait for a callback:
1. Press the
CAMP
OR
Press the
CAMP
OR
Dial 45.
The called extension will receive off-hook ring tone repeated
every few seconds and its first available
green to indicate your call is waiting.
2. Wait for the called party to answer.
The called extension must hold or release their first call before
answering your camp-on.
Note:
•
If you receive No More Calls tone, the extension has no available key to accept
your call. Hang up or leave a message.
•
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the
SPEAKER

Calling Your System Operator

• • • • Dial the appropriate system code to call your system operator or
group of operators. This is normally 0 or 9.
• • • • If you want to call a specific operator, dial that person's extension
number.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key, if assigned
soft key.
key before you begin dialling.
key before you begin dialling.
– 16 –
Keyset User Guide
key will flash
CALL