Off-Hook Voice Announcing (Ohva) - Samsung DCS KEYSET User Manual

Samsung dcs keyset user guide
Table of Contents

Advertisement

To unlock your keyset:
1. While on-hook, press the
2. Dial your 4-digit extension passcode.
3. Dial 0 to set the keyset to Unlocked.
4. Press the
TRSF
Note:
If Locked Out is selected, the
If Locked All is selected, the

Off-Hook Voice Announcing (OHVA)

While engaged on another call, a keyset can receive voice an-
nouncements (OHVA calls) from other keysets. OHVA calls, how-
ever, cannot be received if a keyset is in DND mode or has an OHVA
Block set (see below).
Making OHVA Calls
To make OHVA calls to a busy extension you must have an
key.
1. Dial the extension number or press the
2. When you receive a busy signal, press the
3. After the attention tone, begin speaking.
4. Finish the call by replacing the handset or pressing the
key.
Note:
If you are voice announcing to an extension close to you, use the handset to
avoid an echo effect.
You cannot announce to single line telephones.
TRSF
key to store your selection.
HOLD
HOLD
– 45 –
key and dial 100.
key will flash slowly.
key will light steady.
key for the extension.
DSS
OHVA
OHVA
key.
ANS/RLS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs compact iiDcs-816Dcs-408Dcs-408iDcs-vip

Table of Contents