Automatic Hold; Headset Operation; Hot Keypad - Samsung DCS KEYSET User Manual

Automatic Hold

While on an outside call, pressing a line key, route key or a flashing
key will automatically put your call on hold and connect you to
CALL
the next call. This feature can be turned on or off at your keyset.
1. While on-hook, press the
2. Dial 001 to turn Automatic Hold on or 000 to turn it off. (Or use
the soft keys and
3. Press the
TRSF

Headset Operation

You can switch between headset mode and handset mode easily.
When using headset mode, you press the
release calls.
1. While on-hook, press the
2. Dial 021 to use the headset [Headset Use: On] or 020 to use the
handset [Headset Use: Off]. (Or use the soft keys and
Up/Down keys to select.)
3. Press the
TRSF
Note: When you are in headset mode, your speakerphone is disabled and the
key will light steady.
ANS/RLS

Hot Keypad

Your keyset's keypad can be made "live" or "hot" so that it is not
necessary to lift the handset or press the
begin dialling. Calls can be made and features activated by simply
dialling the line number, trunk group access code, internal number or
feature access code. To activate this feature:
1. While on-hook, press the
2. Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use
the soft keys and
3. Press the
TRSF
TRSF
Up/Down keys to select.)
VOLUME
key to store your selection.
TRSF
key to store your selection.
TRSF
Up/Down keys to select.)
VOLUME
key to store your selection.
– 49 –
key and dial 110.
ANS/RLS
key and dial 110.
SPEAKER
key and dial 110.
key to answer and
VOLUME
key before you