Security; Boot - DFI BW171 User Manual

Security

InsydeH20 Setup Utility
Main Advanced Security Boot Exit
Current TPM Device <TPM 2.0 (FTPM)>
TPM State Enabled, UnOwned
TPM Availability <Available>
TPM Operation <No Operation>
Clear TPM [ ]
Supervisor Password Not installed
Set Supervisor Password
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
TPM Availability
When Hidden, don't expose TPM configuration.
TPM Operation
Enable: Enable storage and endorsement hierarchy.
Disable: Disable storage and endorsement hierarchy.
Clear TPM
Removes all TPM context associated with a specific owner.
Set Supervisor Password
Set the supervisor's password and the length of the password must be greater than
one character.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
When Hidden, don't ex-
poses TPM to 0
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit


Boot

Main Advanced Security
OS Selection
Numlock
Boot Type
PXE Boot to LAN
USB Boot
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
OS Selection
Select Windows/Linux/DOS for OS Selection.
Numlock
Select the power-on state for numlock.
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
PXE Boot to LAN
Disables or enables PXE boot to LAN.
USB Boot
Enable or disable the booting for USB boot devices.
38
InsydeH20 Setup Utility Rev. 5.0
Boot Exit
OS Selection
<Windows>
<On>
<Legacy Boot Type>
<Disabled>
<Enabled>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com