Sata 1/Msata Signal Select; Auto Power-On Select - DFI BW171 User Manual

SATA 1/mSATA Signal Select

JP5 is designed to select the SATA or mSATA signal.
Chapter 2 Hardware Installation
Chapter 2
3 12
1
10
1-4-7-10, 2-5-8-11 On:
1
SATA 1
JP5
3 12
1
10
2-5-8-11, 3-6-9-12 On:
mSATA (default)

Auto Power-on Select

JP6 is used to select the method of powering-on the system. If you want the system to pow-
er-on whenever AC power comes in, set JP6 pins 2 and 3 to On. If you want to use the power
button, set pins 1 and 2 to On.
When using JP6 "Power On" feature to power the system back on after a power failure occurs,
the system may not power on if the power lost is resumed within 5 seconds (power flicker).
13
1
2
3
1-2 On:
JP6
Power-on via power button
(default)
1
2
3
2-3 On:
Power-on via AC power
1
www.dfi.com