Display - ABB Endura ACA592 Operating Instructions Manual

Endura ACA592
4-electrode conductivity transmitter

7.3.5 Display

Menu
Display
Exit
Display Level
Parameter
Conductivity units
Operator pg 3 ln 2
Operator pg 4 ln 2
Operator pg 4 ln 3
Contrast
Language
OI/ACA592/EC–EN Rev. B
Used to configure and format the information displayed,
5
including: language, data displayed on Operator Pages 3 and
4 and screen contrast.
Select
Description
Selects the conductivity unit displayed on HMI only (this parameter is not displayed on the
transmitter):
Auto, µS/cm or mS/cm (this is independent of the conductivity used for HART
communication).
Selects the type of data displayed on line 2 of Operator Page 3:
Temperature compensated conductivity, temperature uncompensated conductivity,
temperature, PV %, current output.
Selects the type of data displayed on line 2 of Operator Page 4:
Temperature compensated conductivity, temperature uncompensated conductivity,
temperature, PV %, current output.
Selects the type of data displayed on line 3 of Operator Page 4:
Temperature compensated conductivity, temperature uncompensated conductivity,
temperature, PV %, current output.
Displays the current contrast level (default 50 %) and enables the contrast to be changed
using the and keys.
Selects the display language for all parameters:
English, Deutsch, Francais, Espanol, Italiano, Portugues
7 Operator Pages and Menus
59