Fisher & Paykel ACTIVESMART RS36A72 Installation Manuals page 18

IMPORTANT!
The water connection instructions below are intended only for the professional installer.
● ●
Water fittings are not included in the refrigerator and must be purchased separately.
● ●
Fisher & Paykel water fittings are available (part number: 841301) and comply with local regulations.
● ●
Ensure the refrigerator is NOT plugged into a power supply.
● ●
Ensure there is enough tubing for the water connection and to pull the refrigerator out for service, if required.
● ●
REAR VIEW
Uncoil the 1/4" (6mm) water tubing and thread one end through
1
the opening in the rear cover until it exits the front.
A
FRONT VIEW
At the front of the product, dislodge the PRV.
2
Grasp the PRV from the clips by pulling it towards you (A).
16
!2 CONNECT TO WATER AND ELECTRICAL SUPPLY
C
Firmly insert water tubing into the PRV. The tube should push in at least
3
5/8" (16mm) before reaching the stop. Once inserted, pull gently on tubing
to ensure it is locked in (B).
Secure the connection by attaching the locking key in between the
PRV and water tubing (C). Mount the PRV back into the clip.
B