Fisher & Paykel ACTIVESMART RS36A72 Installation Manuals page 26

If applicable, remove any remaining protective film
1
on your door panels.
A
Open the refrigerator French doors, firmly push top cover (A)
2
over the top studs.
Open the refrigerator French doors, firmly push side cover (B)
over the side studs.
C
Door side trims
3
Install the side trims by inserting into the panel gaps on each side of the door(s) (C).
Align the trim to the top of the door and press evenly into the panel gap until fully
seated (D).
24
!9 ATTACH COVERS AND DOOR/DRAWER TRIMS
B
D
E
Press the dual adhesive tabs together to form pairs (E) and remove
4
the adhesive backing on one side only.
Press firmly to install on the underside of the drawer top trim in the
indicated locations (F).
Drawer side trims
5
Install the side trims in the same manner (refer to step
Drawer top trim
6
Remove the remaining adhesive backing from the dual adhesive tabs.
Locate the trim against the back surface of the panel and press down
firmly. Ensure the trim is fully seated against the drawer surface.
F
).
3