Table of Contents
Advertisement
9.2 Maintenance
Installer maintenance includes cleaning the heat exchanger
and fans. Dependent on the conditions, this must done about
once every three years.
1
Switch off the appliance on the operating panel (press
the '-' key during 5 seconds; the appliance is switched off
through software) and switch off the power.
3
Remove the front cover.
Chapter 9
> 5 sec.
2x
Renovent Excellent 180
Maintenance
4
Remove the display.
5
Pull out the slide on which the control board is mounted.
Pull all connectors from the print that are connected to con-
nectors at the top of the appliance. Take the earth wire
from the housing.
6
Remove the heat exchanger. Be careful not to damage the
foam parts in the appliance.
Rev. E
23
Hide quick links:
Advertisement
Table of Contents
