Keypad Definitions; Preparation; Transducer Selection - sauter TU 80-0.01US Instruction Manual

SCA: Indicates that the current thickness measurement
Mode is Scan mode, not Single point mode.
File name: current file name is shown
Record No./ Count: The current record number is indicated while this item is highlighted
or the total record counts while it isn't highlighted.
Transducer Model: Current transducer model setting in the instrument
o ATU-US01: N02
o ATB-US06: N05
o ATU-US02: N07
o ATB-US02: HT5
Sound velocity: Current sound velocity setting
Thickness reading: The present Single time measured value is displayed. ↑ means that
the upper measuring limit is exceeded. ↓ means that the value is lower than bottom
measuring limit.
Units label: If the mm symbol is on, the instrument is displaying the thickness value in
millimetres and the sound velocity in m/s.
If the in symbol is on, the instrument is displaying the thickness value in inches and
the sound velocity in inch/us.

3 Keypad definitions

Turn the instrument
on and off
Turn on/off the EL
backlight
Probe Zero operation
Switch selection
among items
Data Save or Data
Delete

4 Preparation

4.1 Transducer Selection

With this instrument it is possible to measure a wide range of different materials, started
from various metals to glass and plastics. These different types of material require the
usage of different transducers. Choosing the correct transducer is the most important
thing to perform accurate and reliable measurements. Generally speaking, the best
8
Exit from cur-
rent selection
Enter
Plus or scroll
up
Minus or
scroll down
TU_US-BA-e-1714