Putting On The Equipment; Taking Off The Equipment - KAT VR WALK User Manual

44 Starting Installation
Correct Wearing

Putting On the Equipment

1. The player sits on a chair, puts on the KAT SHOES (KAT SHOES COVER) by himself and steps on the pedals;
2. The players holds the safety railings, carefully walks into the base plate of the treadmill and turns around with the
back facing the treadmill. The staff member needs to ensure the player' s safety when he walks in;
3. The staff member helps to tighten the girdle set and leg set.
4. Press the switch button on the side of the KATVR-Foot Sensor, and wait until the KATVR-Foot Sensor red indicator is
off and the blue indicator is on.
Caution
1. KAT SHOES are designed with a special structure where there are wheels on the rear end of the soles. Thus, the
staff member needs to be aside after the player puts them on to prevent him from falling over.
2. Make sure the girdle set and leg set are tightened for the safety of the player.
3. For the best experience during the first time, it is suggested that the player has a trial walk of 1-2 minutes before
the experience.
4. Turn off the switch by pressing the switch button on the side of the KATVR-Foot Sensor when not using them to
reduce power consumption.
Taking Off the Equipment
1. The player takes off the head-mounted display;
2. The staff member dismantles the KATVR-Foot Sensor;
3. The staff member helps to untie the girdle set;
4. The player walks out of the KAT WALK with the staff member' s help;
5. The player sits on a chair and takes off the KAT SHOES (KAT SHOES COVER) by himself.
Caution
1. Please strictly follow the above mentioned steps to prevent any damage to the sensors;
2. Make sure the girdle set and leg set is tighten for the safety of player！