Calibration Settings - KAT VR WALK User Manual

35 Starting Installation

Calibration Settings

1. Place the HTC VIVE head-mounted display (Not included with this version, it needs to be purchased separately)
above the girdle set, and make sure the orientations of the display front, the girdle opening and the KAT WALK are
consistent.
2. Open the settings page and click "Calibration" at the bottom.
3. Afterwards click "Calibration" , the KATVR-Top Sensor value will turn into 0.
4. After finishing the calibration, immediately start setting up the room mode without moving the head-mounted
display, the girdle or the KAT WALK.
5. Click the SteamVR at the upper left corner of the testing software Steam and it will display the menu page. Click the
"Settings for running the room" on the top.
Ready