Table of Contents
Advertisement
10 Starting Installation
List of Items
Main equipment
Shell
Tool
Installation Instructions
Please carefully read the relevant information provided in this Manual before installing the KAT WALK.
As the product is quite heavy, please arrange more than three male adults for the installation.
Please keep the power off during the installation to avoid any potential safety risk.
Please place a foam pad of more than 20cm thick (included in the packing box) when installing the support pillar to
prevent the shell from being damaged.
When the product is working, please do not install or dismantle without permission to protect yourself from the
current, and do not open the product even when it is not working.
Tool Preparation
Open the complimentary KAT WALK dedicated tool box, which contains the following:
One bottle of KAT WALK maintenance oil
A set of inner hexagon spanners
One open spanner 22-24
One screw box
One hook spanner 45-52
Item
girder
connecting rod
support pillar
base plate
girdle set
Connecting cables and grounding plug
KAT SENSORS
metal plate at the bottom of support pillar *2
shell at the bottom of girder *2
Pedal
20cm foam pad
KAT WALK maintenance oil
inner hexagon spanner, open spanner 22-24, screw box.
Caution
As there are quite many cable ports, please prepare at least one three-hole plug and four
two-hole plugs, and as the adapter is big, please make sure there is sufficient space between
plugs.
Hide quick links:
Advertisement
Table of Contents
