KAT VR WALK User Manual page 34

34 Starting Installation
Click the "Error detection" at the lower left corner of the page, and the button will change to "Detecting" , and the
sensor data will appear in the text box.
ntroduction of parameters and settings in the page of game settings
KATVR-Top Sensor: displays the KATVR-Top Sensor data
Left KATVR-Foot Sensor: shows if the left KATVR-Foot Sensor is operating normally
Right KATVR-Foot Sensor: shows if the right KATVR-Foot Sensor is operating normally
KATVR-Waist Sensor: displays the KATVR-Magnetic data
KATVR-Waist Sensor forward tilt threshold: shows the front inclination threshold value of the KATVR-Magnetic
KATVR-Waist Sensor backward tilt threshold: shows the rear inclination threshold value of the KATVR-Magnetic
Walking or not: shows whether the player is walking or not
DZ: threshold of the two KATVR-Foot Sensor
DM: threshold value of one KATVR-Foot Sensor
Static: When the player finishes wearing the equipment and stands upright on the KAT WALK, the staff member will
click "Static" and it will show a successful setting of the static status, which will be defined as the static value.
Then the threshold values for the front inclination and the rear inclination of the KATVR-Magnetic will change
accordingly.
Calibration: After installing the base station and the KAT WALK, click "Calibration" when turning them on for the first
time to confirm the orientations for the walking and the head-mounted display. Click "Calibration" again
when moving the base station or the KAT WALK.
Restore default: The software will preset the DZ and DM values. If you would like to restore to the factory settings
after changing the two values, you may click "Restore default" and they will be restored to the factory settings.
Settings: After changing the DZ value and the DM value, click "Settings" so that the changes take effect.
Caution
Please do not randomly change the DZ value and the DM value as they are preset before the delivery.