Quick Guide
Parameter
8-01 Control Site
8-30 Protocol
8-32 Baud Rate
20-00 Feedback 1 Source
20-01 Feedback 1 Conversion
Table 1.15 Closed-loop Applications Set-up
MG18M122
Quick Guide
Option
[0] Digital and ctrl.word
[1] Digital only
[2] Controlword only
[0] FC
[2] Modbus RTU
[0] 2,400 Baud
[1] 4,800 Baud
[2] 9,600 Baud
[3] 19,200 Baud
[4] 38,400 Baud
[5] 57,600 Baud
[6] 76,800 Baud
[7] 115,200 Baud
[0] No function
[1] Analog Input 53
[2] Analog Input 54
[3] Pulse input 29
[100] Bus Feedback 1
[101] Bus Feedback 2
[0] Linear
[1] Square root
Danfoss A/S © Rev. 08/2014 All rights reserved.
Default
Function
[0] Digital and
Select if digital, bus, or a combination of both
ctrl.word
should control the adjustable frequency drive.
[0] FC
Select the protocol for the integrated RS-485
port.
[2] 9,600 Baud
Select the baud rate for the RS-485 port.
[0] No function
Select which input will be used as the source
of the feedback signal.
[0] Linear
Select how the feedback should be calculated
1
1
21
Need help?
Do you have a question about the CDS803 and is the answer not in the manual?
Questions and answers