I/O Ports
Quantum NDX NAS 1U Rack User's Guide
Advanced Chassis Setup
This chapter covers the steps required to install components and
perform maintenance on the Quantum NDX NAS 1U Rack chassis. For
component installation, follow the steps in the order given to eliminate
the most common problems encountered. If some steps are
unnecessary, skip ahead to the step that follows.
Tools Required: The only tool you will need to install components and
perform maintenance is a Phillips screwdriver.
The I/O ports are color coded in conformance with the PC 99
specification. See
Figure 8
locations of the various I/O ports.
on page 30 below for the colors and
Chapter 5
29