Starting Web Management - Planet GS-4210-24P2S Quick Installation Manual

24-port 10/100/1000t 802.3at poe + 2-port 100/1000x sfp managed switch
Hide thumbs Also See for GS-4210-24P2S:
Table of Contents

Advertisement

7. Starting Web Management

The following shows how to start up the Web Management of the PoE Managed
Switch. Note the PoE Managed Switch is configured through an Ethernet
connection. Please make sure the manager PC must be set on the same IP
subnet address.
For example, the default IP address of the PoE Managed Switch is 192.168.0.100;
then the manager PC should be set at 192.168.0.x (where x is a number
between 1 and 254, except 100) and the default subnet mask is 255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ-45/UTP Cable
IP Address:
192.168.0.100
Figure 7-1: IP Management Diagram
 Logging in the PoE Managed Switch
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 to access the Web interface.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-4210 series

Table of Contents