Mio MiVue C320 Series User Manual page 16

Parking mode automatically.
- Motion Detection: Sets the sensitivity level of motion detection to Low, Medium or
High.
- G-Sensor Sensitivity: Sets the sensitivity level of the G sensor that allows automatic
triggering of the parking recording when the dash cam is in Parking mode.
ƒ Video Recording
Changes the settings of recording, including:
- Video Clip Length: Sets the length of each video clip for a continuous recording
(1 min, 3 min or 5 min).
- WDR: Enables or disables WDR (Wide Dynamic Range) function of the device.
- EV: Sets the proper exposure level (-1 - +1) to adjust the brightness of the image. The
default setting is 0.
- Frequency: The options are 50 Hz and 60 Hz.
- G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High) of the
G sensor that allows automatic triggering of the event recording while continuous
recording is in progress.
- Stamps: Sets the information (Coordinates or G-Sensor) that will be displayed on the
recorded video.
- Speed Stamp: Displays the driving speed on the recorded video.
- Text Stamp: Displays customisable text input information.
ƒ System
Allows you to change the system settings of the device.
- Satellites: Displays the status of GPS/GLONASS signal reception. You can press
and then select GPS or GLONASS for better signal reception if the need arises.
- Date/Time: Sets the system date and time. For more information, see the "Setting
the date and time" section.
- System Sound: Enables or disables system notification sounds.
15
en